Sitemap

BIS Certificates (ISI Mark)

• Steel and Iron - Specification for Hot-rolled mild steel sheet and strip in coil form for cold-reduced tinplate and cold-reduced black plate
• Steel and Iron - Stainless Steel wire Rod
• Steel and Iron - Specification for Hot rolled steel strip (bailing)
• BIS Certificate Consultant in Mumbai
• Steel and Iron - Round Steel wire for ropes
• Steel and Iron - Specification for Ferronickel
• Footwear Leather and Other Materials Quality Control Amendment Order 2024
• Footwear - High ankle tactical boots with PU – Rubber sole
• Textile Boots With Polymeric Sole (Jungle Boots) - Specification
• Stoves - Oil pressure stoves
• Stoves - Multi-burner oil pressure stoves
• Stoves - Oil pressure stove, offset burner type
• Steel and Iron - Stainless Steel Blooms Billets And Slabs For Forging
• Safety of Household and similar electrical appliances – Part 2 particular requirement Sec 76 electric fence energizers
• Footwear - Shoes for General Purpose
• Cyfluthrin - Emulsion In Water (Ew) - Specification
• Cement - Low heat Portland Cement
• Footwear - Personal protective equipment – Part 2 Safety Footwear
• Footwear - Rubber microcellular sheets for soles and heels
• Electrical - Safety of household and similar electrical appliances –Electric stoves
• Bromadiolone Rb - Specification
• Personal Protective Equipment Footwear Quality Control Order
• Bottled Water Dispenser Quality Control Order 2023
• Water Meters and Accessories Quality Control Order 2023
• Rubberized Coir Sheets For Cushioning - Specification Part 3 Sandwiched (Third Revision)
• Steel and Iron - Stainless Steel Plate, Sheet and Strip- Specification
• Wood - Plywood for general purposes
• Welded and seamless steel dissolved acetylene gas cylinders
• Baking Powder - Specification (Second Revision)
• Steel and Iron - Indented wire for Pre-stressed concrete
• Aluminium alloy tubes for irrigation purposes -welded tubes
• Soft Soap - Specification (First Revision)
• Press Tool Punches Quality Control Order 2020
• Aluminium alloy tube for irrigation purposes – extruded tube
• Ether
• Textiles - Sanitary napkins
• Steel and Iron - Structural Steel (Ordinary Quality)
• Household electric direct - Acting room heaters
• Personal Fall Arrest Systems - Specification : Part 1 Full Body Harness (Fourth Revision)
• Azospirillum Inoculants - Specification (First Revision)
• Copper strip for electrical purposes
• Steel and Iron - Hot Rolled Carbon Steel Strip for Cold Rolling Purposes — Specification
• Hot Dip Galvanized Stay Strand
• Steel and Iron - Bead Wires for Tyres
• Steel and Iron - Hot Dip aluminium- Zinc alloy metallic coated steel strip and sheet (Plain)
• Specifiacation For Light Rails (First Revision)
• Poly - Pallets For Bag Storage Godowns - Specification
• Steel and Iron - Specification for Cold rolled medium, high carbon and low alloy steel strip for general engineering purposes.
• Textiles - High Density Polyethylene (HDPE) Geomembranes for lining
• Two Wheeler Helmet Quality Control Order 2020
• Helmet for Police and Civil Defence Quality Control Order 2023
• Polyethylene Pipes for the Supply of Gaseous Fuels
• Steel and Iron - Specification for Mild Steel Wire, Cold Heading Quality
• Steel Wire Ropes for General Engineering Purposes
• Sweetened Condensed Milk, Sweetened Condensed Partly Skimmed Milk, Sweetened Condensed Skimmed Milk and Sweetened Condensed High Fat Milk
• Steel and Iron - Specification for Mild Steel Wire Rod for the Manufacture of Machine Screws (By Cold Heading Process).
• Steel and Iron - Specification for Carbon Steel Wire for the Manufacture of Wood Screws
• Steel and Iron - Specification for Steel For Electrically welded round Link Chains.
• Refrigerating Appliances Quality Control Amendment Order 2025
• Steel Wires Strands Ropes and Mesh Quality Control Order 2024
• Asbestos or Fibre Cement Products Quality Control Order 2024
• Steel and Iron - Specification for Steel Wire for Staples, Pins And Clips.
• Jute bags for packing up to 30 Kg foodgrains
• Irrigation Equipment — Granulated Media Filters — Specification ( First Revision )
• Steel and Iron - Specification for Cold rolled steel strips for carbon steel razor blades.
• Specification For Electroplated Coatings Of Zinc On Iron And Steel (Second Revision)
• Steel and Iron - Specification for Steel Wire: (Up to 20 mm) for the manufacture of cold-forged rivets.
• Steel and Iron - Hot Rolled bars for production of bright bars and machined parts for engineering applications.
• Steel and Iron - Specification for Non Magnetic stainless steel for electrical applications Part 3 Specific requirements for sheets, strips and plates.
• Steel and Iron - Specification for Low Carbon Steel Wire for Rivets for use in Bearing Industry
• Steel and Iron - Specification for High Tensile Steel Bars used in Pre-stressed Concrete
• Steel and Iron - Steels for Pneumatic Tools
• Erythrosine, Food Grade - Specification (Third Revision)
• Steel and Iron - Hard Drawn Steel Wire For Upholstery Springs
• Steel and Iron - Expanded Metal Steel Sheets For General Purposes
• Centrifugally Cast Iron Pipes Quality Control Order 2021
• Legal Metrology Material Measures of Length Quality Control Order 2023
• Cross Recessed Screws Quality Control Order 2025
• Deltamethrin Ulv - Specification
• Steel and Iron - Mild steel wire for cotter pins
• Steel and Iron - Mild Steel Rivet Bars For Ship Building
• Steel and Iron - Cold-Reduced And Hot-Rolled Carbon Steel Sheet For Porcelain Enamelling
• Steel and Iron - Steel Wire For Reeds
• Steel and Iron - Steel Billets,Bars And Sections For Boilers
• Steel and Iron - Plates For Galvanizing Pots
• Steel and Iron - Heald Wire
• Steel and Iron - Hot Rolled Steel Plates Sheets And Strips For Manufacture of Agricultural Discs
• Flux Cored Tubular Electrodes Quality Control Order 2021
• HDPE PP Woven Sacks for Fertilizers Quality Control Amendment Order 2024
• Acephate Sp- Specification
• Safety of Electrical Appliances Quality Control Order 2025
• Steel and Iron - Trapezoidal Steel Wire For Springs Washers
• Refillable Seamless steel gas cylinders Part1 Normalized steel cylinders
• Gamma Picoline
• Stand Post Type Water And Water-Cum-Foam Monitor For Fire Fighting - Specification (Second Revision)
• Steel and Iron - Forged/Rolled CTC Segments
• Steel and Iron - Thermostat Metal Sheet and Strip
• Footwear - Leather safety boots and shoes for miners
• Textiles - Polypropylene Multifilament woven geobags
• BICYCLE –FRONT FORKS\
• Sewing Machines Quality Control Order 2021
• Trisodium Phosphate Specification
• Capacitors - A.C. motor capacitors
• Refillable Seamless steel gas cylinders Part 2 Quenched and tempered steel cylinders with tensile strength less than 1100 MPa (112 kgf/mm2)
• Precast Concrete Circular Manhole Specification
• HDPE PP Woven Sacks for 50 Kg Cement Quality Control Amendment Order 2026
• n- Butyl Acrylate
• Textiles - Jute Geotextiles
• Precipitated Barium Carbonate, Technical
• Water Purification System Regulation of Use Rules 2023
• PP Woven Laminated Valve Sacks for Cement Quality Control Amendment Order 2026
• Electric Ceiling Type Fans
• Cement - Portland Slag Cement
• Textiles - Jute Geotextile
• Textiles - Cotton Long Cloth - Specification (Third Revision)
• Precipitated Barium for Ceramic and Glass Industry
• Sodium Sulphide, Technical
• Pesticide - Cartap Hydrochloride Sp - Specification
• 1,3 Phenylenediamine
• Rubberseed Fatty Acids
• Jute Bags Quality Control Order 2022
• HDPE PP Woven Sacks for Polymer Materials Quality Control Order 2023
• Ducted and Package Air Conditioners
• Electrical - Tungsten filament general service electric lamps (upto100 W )
• Textiles - Geotextiles used in Sub-grade Stabilisation in pavement structures
• Hospital Rubber Sheeting Without Reinforcing Fabric - Specification ( First Revision )
• Cables - Specification for Elastomer Insulated Cables Part 2 For Working Voltages form 3.3 kV Up to and Including 33 kV
• Motors for Submersible Pumpsets
• New Insulating Oils
• Steel and Iron - Cold reduced carbon steel sheets and strips Part 1 Cold Forming and Drawing Purpose
• Valve fittings for gas cylinder valves for use with breathing apparatus
• Cables - Crosslinked polyethylene insulated Thermoplastics sheathed cables – Specification Part 2 for working voltages from 3.3 kV up to and including 33 kV
• Specification For Hydraulic Props
• Diflubenzuron Wettable Powder Wp - Specification First Revision
• Cyfluthrin Wp - Specification
• Textiles - Geotextiles used as protection (or cushioning) materials
• Geo Textiles Quality Control Amendment Order 2022
• Cast Iron - Cast iron man hole covers and frames
• Toys - Safety of Toys Part 9 Certain Phthalates Esters in Toys and Children’s Products.
• Atta - Specification(Third Revision Of Is 1155)
• Specification For Cotton Duck (Third Revision)
• Medical - Diagnostic Medical X-Ray Equipment
• Plain Copier Paper
• Fipronil Suspension Concentrate (Sc) - Specification
• Bicycle Frames
• BIS CRS Certificate
• Geotextiles Quality Control Order 2024
• PP HDPE Laminated Woven Sacks for Mail Quality Control Amendment Order 2026
• Gypsum Based Building Materials Quality Control Amendment Order 2024
• Footwear - Shoes for Services
• Pig Iron- Specification
• Footwear - PVC sandal
• Footwear - Sports Footwear for Performance Sports Footwear
• Footwear - Antiriot shoes
• Freezers
• Morpholine
• Flux Cored (Tubular) Electrodes for Gas Shielded and Self-Shielded Metal Welding of Carbon or Carbon- Manganese Steel
• Reverse Osmosis Based Point of Use Water Treatment System for Drinking Purposes
• Hot - Dip zinc coatings on structural steel and other allied products
• Steel and Iron - Mild steel wire rods for general engineering purposes.
• Steel and Iron - High carbon steel wire rods- Specification
• Household Zig-Zag Sewing Machine Head
• Medical Textiles - Surgical Face Masks
• A- twill Jute Bag
• Textiles - Protective Clothing for use in welding and allied processes
• Textiles - Geogrids for flexible pavements
• Textiles - Geocells
• Copper - Specification (Fourth Revision)
• Protective Textiles Quality Control Amendment Order 2024
• Textiles - Open Weave Coir Bhoovastra
• Textiles - Tactical 3 point sling
• Textiles - Geosynthetics — Synthetic Polymer RopeGabions for Coastal and Waterways Protection — Specification
• Specification For Captan (Wettable Powder) Wp
• Aluminium alloy forging stock and forgings (Alloy 24345) for aerospace applications
• Sulphur Dusting Powders - Specification Second Revision
• Protective Textiles Upholstered Composites Quality Control Order 2024
• Safes and Locker Cabinets Quality Control Order 2023
• Steel and Iron - Centrifugally cast (spun) ductile iron pressure pipes for water, gas and sewage
• Insulated Flask for Domestic Use
• SA 8000 Certificate
• Bolts, Nuts & Fasteners - Hexagon Head Bolts, Screws and Nuts of Product Grades A and B – Hexagon Head Screws (Size Range M 1.6 to M 64)
• Bolts, Nuts & Fasteners - Flush Bolts
• Bolts, Nuts & Fasteners - Sliding locking bolts for use with padlocks
• Natural Rubber Compounds - Specification Part 2 For Extruded Products
• BIS Certificate Consultant in Nagpur
• Flame Producing Lighters Quality Control Amendment Order 2024
• Hinges Quality Control Order 2025
• Bolts, Nuts & Fasteners - High Strength Structural Nuts
• Insulating Mats for Electrical Purposes
• Wheeled Fire Extinguishers
• Self- Contained Drinking Water Coolers – Energy Consumption and Performance
• Thiophanate Methyl Wettable Powders - Specification (First Revision)
• Safes
• Valve fittings for use with liquefied petroleum gas cylinders of more than 5 litre water capacity Part 2 Valve fittings for newly manufactured LPG cylinders
• Thermosetting Insulated, Fire Survival Cables for working voltage upto and including 1100V AC and 1500V DC
• Lambda - Cyhalothrin Wp - Specification
• Wood - Wooden Flush Door Shutters (Solid core type) – Particle board, High Density Fibre Board, Medium Density Fibre Board and Fibre Hardboard Face Panels
• Steel and Iron - Steel Cast Billet Ingots, Billets and Blooms for production of High Carbon Steel Wire Rods- Specification
• Steel and Iron - High Tensile Strength Flat Rolled Steel Plate (Up to 6 mm), Sheet and Strip for the Manufacture of Welded Gas Cylinder.
• Wood - Block Boards
• Atrazine Wettable Powder Wp - Specification First Revision
• Bar or wire Wrapped Steel Cylinder Pipes with Mortar Lining and Coating Including Specials
• Textiles - Protective clothing for firefighters
• Zineb Water Dispersible Powder - Specification (Second Revision)
• Short – Pitch Transmission Precision Roller and Bush Chains, Attachments and Associated Chain Sprockets
• Performance Requirements and Methods of Tests for Wheels for Passenger Cars
• Aluminium composite panel
• Performance Requirements and Methods of Tests for Wheels or Rims for Trucks and Buses
• Textiles - Dental Bib or Napkins
• Textiles - Hail Protection Nets for Agriculture and Horticulture Purposes – Woven Hail Protection Nets
• Chicken Feeds - Specification (Sixth Revision)
• Non- metal helmet for Police Force
• Textiles - Hail Protection Nets for Agriculture and Horticulture Purposes- Warp Knitted Hail Protection Nets
• Specification For Trichloroethylene, Technical (Fourth Revision)
• BIS Certificate Consultant in Navi Mumbai
• Copper Tubes for plumbing- Specification
• Stranded steel wire ropes for winding and man –riding haulages in mines
• Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 1 Industrial Application
• Potable Water Bottles Quality Control Amendment Order 2024
• Bottled water dispensers
• Steel Wire Suspension Ropes for Lifts, Elevators and Hoists
• Door handles for mortice lock (vertical type)
• Rubber Hose for Liquefied Petroleum Gas (LPG)- Specification Part 2- Domestic and Commercial Application.
• Electrical - Elastomer insulated cables (Part.1): For working voltages up to and including1100 V
• Vinyl Chloride Monomer - Specification
• Continuous (Piano) hinges
• Hand Tools Quality Control Order 2025
• Diesel Engines – NOx Reduction Agent AUS 32
• Laboratory glassware – One – Mark volumetric flasks
• Tee and strap hinges
• Cables - Welding Cables – Specification
• Cabinet hinges
• Prestressed Concrete Poles For Overhead Power Traction And Telecommunication Lines - Specification (Second Revision)
• Non-ferrous metal butt hinges
• Glass beakers
• Evaporative Air Coolers (Desert Coolers)
• Specification For Malathion, Technical
• Corrugated and Semi – Corrugated Asbestos Cement Sheets
• Welding Rods and Electrodes Quality Control Order 2023
• Cycle and Rickshaw Tyres and Tubes Quality Control Order 2023
• Marble (Blocks, Slabs And Tiles)
• Glass Fibre Reinforced Gypsum Panels
• Shallow Corrugated Asbestos Cement Sheets
• Appliances for stationary storage type electric water heaters
• Gypsum Plaster Boards – Coated/ Laminated Gypsum Plaster Boards
• Asbestos Cement Pressure Pipes (Light Duty)
• Water meters (bulk type)
• Gypsum Plaster Boards – Reinforced Gypsum Plaster Boards and Ceiling Tiles
• V-Belts – Endless V-Belts for Industrial Purposes – fire resistant and antistatic V-Belts
• Electric Immersion Water Heaters
• Cross Recessed Tapping Screws Part 2 Countersunk Flat Head
• Fasteners – Hexagon Washer Head Drilling Screws with Tapping Screw Thread
• Good Distribution Practice (GDP) Certification
• Smart Meters Quality Control Order 2023
• Boric Acid – Specification
• Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 1 Pan Head
• Cross Recessed Tapping Screws: Part 1 Pan Head
• Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 3 Raised Countersunk Head
• Chipboard Screws – Specification
• Fibre Ropes Of Polyester / Polyolefin dual Fibres
• Steel wire ropes – Fibre main cores – Specification
• BIS Product Certification scheme
• Rubber Hoses, Textile-Reinforced, for General-Purpose Water Applications
• BIS Certificate Consultant in Nashik
• Flashlight – Specification
• Textiles - Bullet resistant jackets
• Fibre Ropes — Polyethylene —3- And 4-Strand Ropes
• Work chairs
• Tables and desks
• Stainless Steel Milk Cans - Specification
• Insulated Flask Bottles and Containers Quality Control Amendment Order 2024
• Wrought Aluminium Utensils
• Textiles - Water-proof multipurpose rain poncho
• Parliament hinges
• Resin Treated Compressed Wood Laminates Quality Control Order 2024
• Bolts, Nuts & Fasteners - Fasteners – Threaded Steel Fastener – Step Bolts for Steel Structures
• Lighters- Safety Specifications
• Pesticides - Pendimethalin, Technical - Specification
• Boxes and Enclosures for Electrical Accessories for Household and Similar Fixed Electrical Installations
• Electric Toys - Safety of Electric Toys.
• Utility Lighters – Safety Specifications
• Legal Metrology – Material Measure of length – Woven metallic and glass fibre tape measures
• Copper Rods and Bars for Electrical Purposes
• Specification For Alachlor Emutsifiable Concentrates
• LED modules for general lighting: Part 1 safety requirements
• Steel and Iron - Mild steel and Medium Tensile steel bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 2 Hard- Drawn Steel Wire
• Steel and Iron - Mild Steel and Medium Tensile Steel Bars and Hard–Drawn Steel Wire for Concrete Reinforcement: Part 1 Mild steel and medium tensile steel bars
• Steel and Iron - Cold rolled non-oriented electrical steel sheets and strip-fully processed type (CRNO)
• Steel Pipe Flanges
• Hermetic compressor - Hermetic Compressors-Specification
• Bolts Nuts and Fasteners Quality Control Order 2024
• Packaged Pasteurized Milk
• Welding rode and bare electrodes for gas shielded arc welding of structural steel
• Electrical - PVC insulated cables for working voltages up to and including 1100V
• Steel and Iron - Stainless Steel for welding electrode core wire
• Footwear - Rubber Hawai Chappal
• A.C. Static Direct Connected Watt Hour Smart Meter Class 1 and 2
• Steel and Iron - Mild steel wire for General Engineering purposes.
• Indutech Quality Control Order 2024
• Wood - Marine plywood
• BIS Certificate Consultant in Satara
• GDPR Compliance and Data Protection
• Textiles—High Density Polyethylene (HDPE) /Polypropylene (PP) Woven Sacks for Packaging Fertilizers
• Wrought aluminium and aluminium alloy bars, rods and sections (For General Engineering Purposes)
• Textiles - Protective gloves for firefighters
• Cement - Microfine Ordinary Portland Cement- Specification.
• Steel and Iron - Hot Rolled Steel Strip for Welded Tubes and Pipes.
• Water meters (domestic type)
• Bolts, Nuts & Fasteners - Wrought Aluminium Alloy Bolt and Screw Stock for General Engineering purposes
• Wrought aluminium and aluminium alloys, forging stock and forgings for general engineering purposes
• Wrought Copper Tubes for Refrigeration and Air- Conditioning Purpose
• Cookware Utensils and Cans Quality Control Order 2026
• Domestic Gas Stoves PNG Quality Control Order 2023
• Resin treated compressed wood laminates (compregs) – For general purposes
• Battery - Multi-Purpose dry batteries
• Resin treated compressed wood laminates (compregs) – For chemical purposes
• Flexible Steel Conduits For Electrical Wiring-Specification (First Revision)
• General purpose chairs and stools
• BIS Certificate Consultant in Thane
• Safety Glass - Specification: Part 3 Solar Applications
• Fibre Ropes — Polyester — 3-, 4-, 8- and 12- Strand Ropes
• Light weight jute sacking bags for packing 50 Kg foodgrains
• Steels for cold heading/cold extrusion applications – specification Part 2 Stainless steel
• Steel and Iron - Pre-painted aluminium zinc alloy metallic coated steel strip and sheet (Plain).
• Jute bags for packing 50 Kg foodgrains
• Steels for Cold Heading/Cold extrusion application Part-1 Wrought carbon and low alloy steels
• Storage units
• Footwear - Leather safety footwear having direct moulded rubber sole
• Styrene-Butadiene Rubber Latex
• Steel and Iron - Low Nickel Austenitic Stainless Steel Sheet and Strip For Utensils and Kitchen Applications- Specification
• All types of machinery for making embroidery and (or) their assemblies /sub-assemblies /components.
• Bolts, Nuts & Fasteners - Hexagon Head Bolts, Screws and Nuts of product Grade C – Hexagon Nuts (Size Range M5 to M64)
• Drums Large, Fixed Ends – Grade A
• Phosphorous Oxychloride, Technical
• Aluminium and aluminium alloy foil for pharmaceutical packaging
• Fire Extinguishers Quality Control Order 2023
• Rubber Gaskets for Pressure Cookers Quality Control Order 2023
• Steel and Iron - Steels For Piston Pins (Gudgeon Pins)
• Hydraulically Regulated Door Closers
• Specification For Nickel Powder (First Revision)
• Steel and Iron - Quenched And Tempered Alloy Steel Forgings For Pressure Vessels
• Safe deposit locker cabinets
• Steel and Iron - Specification for Carbon manganese steel forgings for pressure vessels
• Wrought aluminium and aluminium alloy plate for general engineering purposes
• Bolts, Nuts & Fasteners - Indicating Bolts for use in public baths and lavatories
• Wrought aluminium and aluminium alloys- Extruded round tube and hollow sections for general engineering purposes
• Ceiling Roses
• Wrought aluminium and aluminium alloy sheet and strip for general engineering purposes
• BICYCLE – MUDGUARDS
• Bolts, Nuts & Fasteners - Tower Bolts- Non-ferrous metal
• Bolts, Nuts & Fasteners - Hexagon Head Screw (Size ranges from M 5 to 64)
• Bolts, Nuts & Fasteners - High Strength Structural Bolts
• Solar Flat Plate Collector for Solar Water Heating Systems
• Single-ended Open-jaw Adjustable Wrenches
• Cement - Sulphate Resisting Portland Cement
• Textiles - Geogrids used in reinforced soil retaining structures
• Textiles - Sandwich Extrusion Laminated Polypropylene Pp Woven Sacks For Packaging Bulk Commodities - Specification Amendment No. 2
• 3(N, N-DiEthyl) Aminophenol
• Wrought aluminium and aluminium alloy rivet stock for general engineering purposes
• Copper Wire Rods for Electrical Applications
• Bolts, Nuts & Fasteners - Non-ferrous metal sliding door bolts (aldrops) for use with padlocks
• Steel and Iron - Hot-dip Zinc Coating on Structural Steel Bars for Concrete Reinforcement – Specification
• Electric Ceiling Fans Quality Control Order 2023
• Laboratory Glassware Quality Control Amendment Order 2024
• test
• Specification For Borax (Second Revision)
• Textiles - High visibility Warning Clothes
• Bolts, Nuts & Fasteners - Fasteners – Threaded Steel Fasteners – Hexagon Head Transmission Tower Bolts
• Switch-socket-outlets (non-interlock type)
• Coir Felt - Specification (First Revision)
• Covered electrodes for manual metal arc welding of carbon and carbon manganese steel
• Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 25 Microwave ovens
• Information Technology Equipment – Safety – General Requirements
• Audio, Video and Similar Electronic Apparatus – Safety Requirements
• Safety of household and similar electrical appliances: Part 2 Particular requirements: Section 26 Clocks
• General and Safety Requirements for UPS
• Safety of Lamp Control gear Part 2 Particular Requirements Section 13 d.c. or a.c. Supplied Electronic Control gear for LED Modules
• Pedal Operated Paddy Threshers - Specification (Second Revision)
• Secondary Cells and Batteries containing Alkaline or other non-acid Electrolytes-Safety Requirements for Portable sealed secondary cells, and for Batteries made from them for use in portable applications
• Luminaries Part 5 Particular Requirements Sec 1 Fixed General
• Luminaires Part 5: Particular Requirements Section 2 Recessed Luminaires
• Luminaires – Part 5: Particular Requirements Section 3 Luminaires for Road and Street Lighting
• Luminaires – Part 5: Particular Requirements Section 5 Flood Lights
• Luminaires – Part 5: Particular Requirements Section 6 Hamp Lamps
• Luminaires – Part 5: Particular Requirements Section 7 Lighting Chains
• Luminaires – Part 5: Particular Requirements Section 8 Luminaires for Emergency Lighting
• Luminaries: Part 5 Particular Requirements Section 9 Rope Lights
• Self-Ballasted LED Lamps for General Lighting Services Part 1 Safety Requirements
• Safety of household and similar electrical appliances: part 2 particular requirements, section 6 cooking ranges, hobs, ovens and similar appliances
• safety of household and similar electrical appliances: part 2 particular requirements: section 15 appliances for heating liquids
• Particular requirements for Electronic switches standards for Switches for household and similar fixed electrical installations.
• Digital Television Receiver for Satellite Broadcast Transmission – Specification
• Crystalline Silicon Terrestrial Photovoltaic (PV) modules – Design Qualification And Type Approval
• Thin-Film Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
• Safety of household and similar electrical appliances – particular requirements – toasters, grills, roasters and similar appliances
• Safety of Power Converters for Use in Photovoltaic Power Systems Part 2-Particular Requirements for Inverters
• Test Procedure of Islanding Prevention Measures for Utility-Interconnected Photovoltaic Inverters
• Ortho Phosphoric Acid – Specification
• Polyphosphoric Acid – Specification
• Trimethyl Phosphite – Technical Grade
• Cotton Bales- Specification
• Low – Voltage Switchgear and Controlgear: Part 2 circuit – Breakers (First Revision
• Low-Voltage switchgear and control gear: Part 3 switches, disconnectors, switch disconnectors and fuse – Combination units
• Low-Voltage Switchgear and Controlgear Part 4 Contactors and Motor-Starters Section 1 Electromechanical Contactors and Motor-Starters (Second Revision )
• Low-Voltage switchgear and control gear: Part 5 control circuit devices and switching elements: Sec 1 electromechanical control circuit devices ( First Revision)
• Low-Voltage switchgear and control gear: Part 5 control circuit devices and switching elements: Sec 2 proximity switches
• Low-Voltage Switchgear and Controlgear Part 5 Control Circuit Devices and Switching Elements Section 5 Electrical emergency stop devices with mechanical latching function
• All types of Pumps for handling liquids, liquid elevators and (or)their assemblies /sub-assemblies /components
• All types of compressors and(or)their assemblies /sub-assemblies /components
• All types of machinery for treatment of material by a process involving a change of temperature and(or)their assemblies /sub-assemblies /components
• All types of centrifuges, filtering or purifying machinery for liquid and gas and(or)their assemblies /sub-assemblies /components
• All types of machinery for filling, closing, sealing, labelling bottles, packing or wrapping and(or)their assemblies/subassemblies /components
• All types of cranes and (or) their assemblies /sub-assemblies/components
• All types of machinery for construction, earthmoving, Mining and (or)their assemblies /subassemblies/components
• All types of weaving machines (looms) and (or) their assemblies/ sub-assemblies / components.
• All types of metal cutting machines tools covered under the heading 8456 to 8461 and (or) their assemblies /sub-assemblies/components.
• All types of machine tools for working stone, ceramics, concrete, asbestos cement or like mineral glass and (or)their assemblies /subassemblies /components.
• All types of machinery for working rubber and plastics and(or) their assemblies /sub-assemblies /components
• All types of Machines including the machines for public works & building and the machinery & mechanical appliances having individual functions, not specified Or included elsewhere in Chapter 84 and(or)their assemblies/subassemblies /components
• All types of gears and gearing, toothed wheels, chain sprocket, transmission elements ball or roller screws, gear boxes and speed changers, including torque converters And (or)their assemblies /sub-assemblies /components
• All types of Rotary electrical machines such as Generator, etc. and (or) their assemblies /sub-assemblies /components.
• All types of Diesel Generator and (or) their assemblies /sub-assemblies /components.
• All types of Transformers and (or) their assemblies /sub-assemblies /components.
• All types of Power Semiconductor Converter and (or) their assemblies /sub-assemblies /components.
• All types of switch gear and control gear equipment operating at voltages not exceeding 1000 volts and (or) their assemblies /sub-assemblies /components.
• All types of switch gear and control gear equipment operating at voltages exceeding 1000 volts and (or) their assemblies /sub-assemblies /components.
• Why BIS Certification is Mandatory for Electronic Products in India
• BIS Certification for Startups: Why It's a Smart Investment
• What is BIS Certification and Why is it Important for Your Business?
• Guidelines for Marking Labels under BIS CRS Registration
• Why BIS Certification is Mandatory for Electronic Goods in India
• Top Industries that Require BIS/ISI Certification in India
• Understanding ISI Mark: Why It's Important for Your Product in India
• Bayonet Lamp Holders
• Why Electronic Manufacturers Must Comply with BIS Standards
• Avoid Legal Trouble: Get Your Products BIS Certified Today
• The Cost of Non-Compliance: What Happens If You Don't Have BIS Certification?
• Why Your Product May Get Rejected for BIS Approval – And How to Fix It
• BIS for Amazon & Flipkart Sellers: What You Need to Sell Electronics Legally
• How Certificate World Simplifies the BIS & ISI Certification Process
• BIS Certification for Packaged Drinking Water – Understanding IS 14543:2016
• Who Needs ISI Mark Certification in India?
• What Are the Essential Requirements to Be Possessed by a Manufacturer for Applying to BIS for Obtaining a License?
• Made in India, Trusted Worldwide: The Power of BIS & ISI Certifications
• What is the Validity of BIS Product Certification License?
• Top Construction Materials That Require BIS Certification in 2025
• What is Considered to be a Misuse of BIS Standard Mark?
• Common Challenges in BIS Certification for Construction Materials and How to Overcome Them
• Understanding the BIS Certification Process in India: Ensuring Quality and Safety for the Indian Market
• Top Reasons Why Every Business Should Hire a BIS Consultant and the Key Benefits
• Appliances for electric instantaneous water heaters
• BIS Certification for Microwave Ovens: Ensure Safety and Legal Compliance with IS 302-2-25:2014
• Is Your Product Ready for Indian Markets? Get BIS Certified First
• Why Working with BIS Consultants Saves Time and Ensures Compliance
• Latest Updates in BIS/ISI Certification Policies - 2025 Edition
• Wood Based Products Quality Control Order 2024
• Diesel Engines NOx Reduction Agent AUS 32 Quality Control Order 2024
• Cast Iron Products Quality Control Order 2024
• Air Cooler and Air Filters Quality Control Order 2025
• Electrical Appliances for Domestic Water Heating Quality Control Order 2025
• Ropes and Cordages Quality Control Order 2024
• HACCP Certificate
• REACH Certificate
• GMP Certification
• Certificate Of Conformity (Scheme IV)
• BIS For ECO-MARK
• Solar DC Cable and Fire Survival Cable Quality Control Order 2023
• Electrical Appliances for Kitchen Quality Control Order 2023
• FSC Certificate
• BIS Certification for Cement in India
• Plywood and Wooden Flush Door Shutters Quality Control Order 2024
• Electrical Appliances for Skin and Hair Care Quality Control Order 2023
• Square Tins for Solid Products
• Plugs and socket-outlets of Rated Voltage up to and including 250 Volts and Rated current up to and including 16 amperes
• Soda Ash, Technical - Specification (Fifth Revision)
• Cement Quality Control Order 2003
• Miscellaneous Steel Products Quality Control Order 2023
• Footwear - Sports Footwear for General Purpose
• Aluminium and Aluminium Alloy Products Quality Control Order 2025
• Electrical Wires, Cables, Appliances and Protection Devices QCO 2003
• Multi-Purpose Dry Batteries Quality Control Order
• Electrical Appliance Fans Quality Control Order 2023
• Oil Pressure Stoves Quality Control Order 1997
• Pneumatic Tyres and Tubes Quality Control Order 2009
• Gas Cylinder Rules 2016
• Precision Roller and Bush Chains Quality Control Order 2024
• Clinical Thermometers Quality Control Order 2001
• Steel & Steel Products Quality Control Amendment Order 2025
• Self-Contained Drinking Water Cooler Quality Control Order 2024
• Electrical Appliances for Commercial Dispensing and Vending Quality Control Order 2025
• Ductile Iron Pressure Pipes and Fittings Quality Control Order 2009
• Medical Textiles Quality Control Second Amendment Order 2025
• V-Belt Quality Control Amendment Order 2024
• Domestic Stainless steel vacuum flask/bottle
• Rehabilitation Equipment —Wheelchairs, Folding, Adult Size
• Agro Textiles Quality Control Amendment Order 2024
• Steel Tubes Quality Control Order 2020
• Malleable Iron Shots and Grits Quality Control Order 2020
• Electrical Appliances for Domestic Clothes Washing Quality Control Order 2024
• Potassium Permanganate Specification
• Electrical - Energy Efficient Induction Motors-Three Phase Squirrel Cage
• Steel and Iron - Hot Rolled Carbon Steel Sheet, Plate and Strip — Specification.
• Cement - High Alumina Cement for Structural use
• 2,4 - D Ethyl Ester Ec- Specification (First Revision)
• Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 10 kilogram, 15 kilogram, 20 kilogram, 25 kilogram, and 30 kilogram Foodgrains
• Steel Tubes, Tubulars And Other Steel Fittings - Specification: Part 2 Steel Pipe Fittings (Fifth Revision)
• Electrical - AC watt-hour meters, class 0.5, 1 & 2
• Low Expansion Foam Making Branch Pipe And Portable Foam Inductor - Specification (Third Revision)
• Safety of Household and similar electrical appliances Part 1 General requirements
• Electrical - Safety of household and similar electrical appliances– Electric immersion water-heaters
• Electrical - Residual current operated circuit breakers for house hold and similar uses-Part 1 Circuit breakers without integral overcurrent protection (RCCBs)
• Energy Efficient Induction Motors Quality Control Order
• Electrical - Switches for domestic and similar purposes
• Electrical Capacitors Quality Control Order 2017
• Linear Alkyl Benzene
• Caustic Soda Quality Control Order 2018
• Boric Acid Quality Control Order 2019
• Poly Aluminium Chloride Quality Control Order 2019
• Phthalic Anhydride Quality Control Amendment Order 2022
• Gamma Picoline Quality Control Order 2020
• Copper Products Quality Control Amendment Order 2025
• Morpholine Quality Control Order 2020
• Sodium Sulphide Quality Control Order 2020
• Potassium Carbonate Quality Control Order 2020
• Acetone Quality Control Order 2020
• Phosphorous Trichloride Quality Control Order 2020
• Phosphorous Pentachloride Quality Control Order 2020
• Phosphorous Oxychloride Quality Control Order 2020
• Hydrogen Peroxide Quality Control Order 2022
• Precipitated Barium Carbonate Quality Control Order 2020
• Sodium Formaldehyde Sulphoxylate Quality Control Order 2020
• n-Butyl Acrylate Quality Control Amendment Order 2023
• Ether Quality Control Order 2020
• Styrene-Butadiene Rubber Latex Quality Control Amendment Order 2024
• Synthetic Micro-Fibres for Cement Matrix Quality Control Amendment Order 2022
• Linear Alkyl Benzene Quality Control Amendment Order 2022
• 3 (N, N Di-Ethyl) Aminophenol Quality Control Order 2021
• Methylene Chloride Quality Control Amendment Order 2023
• Red Phosphorus Quality Control Order 2021
• 1.3 Phenylenediamine Quality Control Order 2022
• Rubberseed Fatty Acids Quality Control Order 2022
• BIS Kitchen Appliances Quality Control Order 2018
• BIS Domestic LPG Water Heater Quality Control Order 2018
• Air Conditioner and Related Parts Quality Control Amendment Order 2025
• Plugs, Socket-Outlets and Prepayment Meters Quality Control Order 2021
• Domestic Gas Stoves LPG Quality Control Order 2019
• Transparent Float Glass Quality Control Order 2021
• Domestic Pressure Cooker Quality Control Amendment Order 2020
• Cables Quality Control Order 2020
• Rubber Hose for LPG Quality Control Order 2020
• Aluminium Foil Quality Control Order 2020
• Toys Quality Control Amendment Order 2024
• Transparent Sheet Glass Quality Control Order 2021
• Safety Glass Quality Control Amendment Order 2023
• HDPE and PP Woven Sacks Quality Control Order 2020
• Butterfly Valves Quality Control Order 2020
• Bicycle Retro Reflective Devices Quality Control Amendment Order 2024
• Plain Copier Paper Quality Control Order 2020
• Automobile Wheel Rim Component Quality Control Amendment Order II 2023
• Footwear Rubber and Polymeric Material Quality Control Amendment Order 2024
• Drums and Tins Quality Control Order 2023
• Door Fittings Quality Control Order 2023
• Telescopic Ball Bearing Drawer Slide Quality Control Order 2024
• Solar Thermal Systems Quality Control Order 2024
• Electric Fence Energizers Quality Control Order 2024
• All Electrical Appliances
• Textiles — Manila Ropes — Specification
• Steel and Iron - Steel for the manufacture of laminated springs (railway rolling stock) Part 2: Rib and Groove Sections- Specification.
• Flashlight Quality Control Order 2025
• Stainless Steel Pipes and Tubes Quality Control Order 2025
• Furniture Quality Control Order 2025
• Wrought aluminium and aluminium alloys for manufacture of utensils
• Steel and Iron - Steel Wire For Nipples For Spokes
• Acetone
• Steel and Iron - Stainless Steel Wires
• Potassium Carbonate, Anhydrous
• Feeding Bottles - Glass Feeding Bottles
• Insulated Container for Food Storage
• Specification For Propoxur Emulsifiable Concentrates
• Personal Fall Arrest Systems - Specification : Part 7 Single Point Anchor Devices
• Wood - Prelaminated particle boards from wood and other Lignocellulosic material
• Welded low carbon steel cylinders exceeding 5 litre Water capacity for low pressure liquefiable gases Part 4 Cylinders for toxic and corrosive gases
• Welded low carbon steel cylinders for low pressure liquefiable gases not exceeding 5 litre water capacity
• Low pressure regulators for use with liquefied petroleum gas (LPG) mixtures
• Butterfly valves for general purpose
• Textiles - Shoe covers
• Ice Cream and Kulf
• Valve Fittings for Use with Liquefied Petroleum Gas (LPG) Cylinders up to and Including 5-Litre Water Capacity
• Bolts, Nuts & Fasteners - Tower Bolts- Ferrous metals
• Steel and Iron - Ferrosilicon – Specification
• Steel and Iron - Ferrochromium – Specification
• Textiles - Viscose Staple Fibres - Specification
• Steel and Iron - Plain Hard-drawn Steel Wire For Pre-stressed Concrete: Part 1 Cold Drawn Stress-relieved Wire
• Automobile - Automotive vehicles –Tubes for pneumatic tyres
• Bolts, Nuts & Fasteners - Stainless Steel Sliding Door Bolts (Aldrops) for use With Padlocks
• Medical - Clinical thermometers :Part 2 Enclosed scale type
• Propiconazole Ec - Specification
• Steel and Iron - Stock for Forgings produced from Continuously Cast Blooms, Billets and Slabs
• Ammonia Liquor Specification
• Specification for Ferronickel-
• Steel and Iron - Uncoated stress relieved strand for Pre-stressed concrete.
• Steel and Iron - Tool Steel Forgings For Metal Forming
• Capacitors - Shunt Power Capacitors of the Non-Self-Healing Type for AC System having a Rated Voltage up to and Including 1000V Part-1 General Performance, Testing amd Rating Safety Requirements Guide for Installation and Operation
• Imidacloprid Suspension Concentrate (Sc) - Specification
• Steel and Iron - High strength deformed steel bars and wires for concrete reinforcement
• Steel and Iron - Fusion bonded epoxy coated reinforcing bars
• Steel and Iron - Cold reduced carbon steel sheets and strips Part 2 High Tensile and Multi-phase Steel
• Steel and Iron - Cold-rolled Carbon Steel Strips for Ball and Roller Bearing Cages/ Retainers- Specification.
• Steel and Iron - Mild steel for metal arc welding electrodes.
• Footwear - Canvas Boots Rubber Sole
• Steel and Iron - Hot Rolled Steel Plate (up to 6 mm) Sheet and Strip for the Manufacture of Low Pressure Liquefiable Gas Cylinders
• Cellulose Film - Specification ( Second Revision )
• Electrical - AC static watt-hour meters, class 1 & 2
• Steel and Iron - Hot rolled steel narrow width strip for welded tubes and pipes
• Cables - Specification for Flexible Cables for Miner’s Cap-Lamps
• Multicore And Symmetrical Pairquad Cables For Digital Communications Part 5: Symmetrical Pairquad Cables With Transmission Characteristics Up To 1 000 Mhz Horizontal Floor Wiring Sectional Specification
• Stainless Steel Sinks for Domestic Purposes
• Footwear - Unlined moulded rubber boots
• Steel and Iron - Steel wire for mechanical springs Part-1 cold drawn unalloyed steel wire.
• Double-acting spring hinges
• Specification For Methanol (Methyl Alcohol) (Third Revision)
• Washer - Disinfectors: Part 2 Requirements And Tests For Washer - Disinfectors Employing Thermal Disinfection For Surgical Instruments, Anaesthetic Equipment, Bowls, Dishes, Receivers, Utensils, Glassware, Etc
• Steel and Iron - Structural Weather resistant steel.
• Steel and Iron - Structural Steel for Building for Structures with improved seismic Resistance
• Laboratory glassware – Narrow-necked boiling flasks
• Steel and Iron - Stainless Steel Bars and Flats
• Steel and Iron - Stainless Steel sheets and strips for utensils- Specification
• Potable Water Bottles (Copper, Stainless Steel, Aluminum)
• Stainless Steel Welded pipes and tubes for general service
• Temephos, Emulsifiable Concentrate (Ec) - Specification (First Revision)
• Steel and Iron - Bright steel bars – Specification
• Electroplated Coatings Of Copper - Specification
• Steel and Iron - Case Hardening Steels
• Behind The Ear (Bte) Hearing Aids - Digital - Specification
• Steel and Iron - Specification for Steel for valves for internal combustion engines
• Steel and Iron - Continuously pre-painted galvanized steel sheets and coils
• Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for filling Sand
• Steel and Iron - Specification for Steel Wire for spokes.
• Steel and Iron - Uncoated Stress Relieved Low Relaxation Seven-ply Strand For Pre-stressed Concrete.
• Irrigation Equipment - Strainer - Type Filters - Specification (First Revision)
• Steel and Iron - Specification for Steel Wire for Umbrella Ribs .
• Respiratory Protective Devices - Half Masks And Quarter Masks - Specification ( First Revision )
• Steel and Iron - Steel ingots, billets and blooms for the production of springs, rivets and screws for general engineering applications – Specification.
• Steel and Iron - Steel ingots, blooms and billets for production of mild steel wire rods for general engineering purposes – Specification
• Steel and Iron - Specification for Steel Wire for Needles.
• Dairy Whitener - Specification First Revision
• Steel Tubes For Idlers For Belt Conveyors - Specification (Second Revision)
• Steel and Iron - Cold-Rolled Stainless Steel Strips for Razor Blades
• Steel and Iron - Carbon Steel Cast Billet Ingots, Billets, Blooms and Slabs for Rerolling purposes- Specification
• Butachlor Emulsifiable Concentrate (Ec) - Specification (First Revision)
• Steel and Iron - Steel Wire For Banding Of Armatures And Rotors Part II Specific Requirements for magnetic banding wires
• Door Handles
• Caustic Soda -Specification
• Galvanized Steel Barbed Wire for Fencing
• Toluene Diisocyanate (Tdi-80) - Specification
• Steel and Iron - Heat Resisting Steels
• Steel and Iron - Soft Magnetic Iron Strips
• Steel and Iron - Alloys Used in Electrical Resistance Metallic Heating Elements
• Steel and Iron - Steel Rivet Bars (medium And High Tensile) – For Structural Purposes
• Steel and Iron - Cold-reduced Electrolytic Chromium/Chromium oxide – coated steel
• Crop Protection Equipment - Hand-Operated Stirrup-Type - Specification (Sixth Revision)
• Atrazine, Technical - Specification (First Revision)
• Steel and Iron - Cold-reduced Electrolytic Tin Plate
• Steel and Iron - Cold – Reduced tinmill products – Blackplate
• Cables - Elastomer Insulated Flexible Cables for Use in Mines – Specification
• Steel and Iron - Flame And Induction Hardening Steels
• Footwear - Leather safety footwear with direct moulded polyvinyl chloride (PVC) sole
• Specification For Aluminium Tubes For Refrigeration Purposes
• Cyphenothrin, Ec - Specification
• Steel and Iron - Hot-Rolled Steel Strip, Sheet and Plates for Welded Steel Pipe for Pipeline Transportation Systems
• Steel and Iron - Electrogalvanized Hot Rolled and Cold Reduced Carbon Steel Sheetsand Strips
• Specification For Brass Tubes For General Purposes (Third Revision)
• Stainless Steel Cookware
• Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging of 50 kilogram Foodgrains
• Steel and Iron - Hot-Dip Zinc – Aluminium – Magnesium Alloy Coated Steel Sheets, Plates and Strips
• Electrical Transformers Quality Control Order 2015
• Steel and Iron - Ductile iron fittings for pressure pipes for water, gas and sewage
• Steel and Iron - Steel tubes used for water-wells (upto 200 mm dia)
• Chlorinated Polyvinyl Chloride Compounds Used For Pipes And Fittings - Specifications
• Phosphorous Pentachloride, Technical
• Liquefied petroleum gas containers for automotive use
• Specification for Phthalic Anhydride, Technical
• Transparent Float Glass
• Grouts For Filling Of Joints Of Tiles And Stones - Specification
• Telescopic Ball Bearing Drawer Slide
• Cast Iron - Grey iron castings
• Cement - Ordinary Portland Cement
• Steel and Iron - Galvanized steel sheets ( plain and corrugated).
• Finned type Heat Exchanger for Room Air Conditioner
• Retro-reflective Devices
• Methylene Chloride (Dichloromethane)
• HCast Iron Components
• SODIUM NITRATE FOR EXPLOSIVES AND PYROTECHNIC INDUSTRY
• Cables - Specification for Crosslinked Polyethylene Insulated PVC Sheathed Cables Part 1 for working voltages up to and including 1100 V
• Cables - Cross-Linked Polyethylene Insulated Thermoplastics Sheathed Cables Part 3 For Working Voltages from 66 kV Up to and Including 220 kV
• Cables - Aerial Bunched Cables – For Working Voltages Up to and Including 1100 Volts – Specification
• Door closers, concealed type (hydraulically regulated)
• Pesticide - Carbendazim (Mbc) Wp - Specification (First Revision)
• Toys - Safety of Toys Part l Safety Aspects Related to Mechanical and Physical Properties.
• Cables - Halogen Free Flame Retardant (HFFR) Cables for Working Voltages Up to and Including 1100 V – Specification
• Pesticide - Deltamethrin Wp Specification
• Steel and Iron - Specification for Non Magnetic stainless steel for electrical applications Part 2 Specific requirements for binding wire.
• Bolts, Nuts & Fasteners - Mild steel sliding door bolts for use with padlocks
• Steel and Iron - Steel tubes for structural purposes
• Steel and Iron - Ferromanganese – Specification
• Specifiction For Research Microscope
• Wood - Medium density fibre boards for general purpose
• Aluminium cans for beverages
• Mixed Polyolefin Fibre Ropes
• Cast Iron - Cast iron single faced thimble mounted sluice gates
• Hexagon Socket Head Cap Screws (Fifth Revision)
• Wood - Veneered particle boards
• Wood - Plywood for concrete shuttering works – Specification
• Textiles –High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for packaging 50 kilogram /25 kilogram Sugar
• Textiles – Flat woven webbing slings made of man-made fibres for general services
• Wood - Veneered decorative plywood
• Wood - Wooden flush door shutters (cellular and hollow core type) – Plywood face panels
• Tubular Fluorescent Lamps For General Lighting Service: Part 2 Performance Requirements (Second Revision)
• Cross-recessed Countersunk Head Wood Screws – Specification
• Stainless steel tubes for the food and beverage industry
• Wood - Structural plywood – Specification
• Ultrafine Ground Granulated Blast Furnace Slag
• Multifunction valve assembly for permanently fixed liquefied petroleum gas (LPG) containers for automotive use
• Steel and Iron - Fire resistant Steel- Specification
• Acrylonitrile Butadiene Styrene (ABS)
• Wrought aluminium and aluminium alloy wire for general engineering purposes
• Chain Pipe Wrenches
• Electrical - Self Ballasted Lamps for General Lighting Services – Part 1 : Safety Requirements & Part 2 : Performance Requirements
• Mechanically Woven, Double- Twisted, Hexagonal Wire Mesh Gabions, Revet Mattresses and Rock Fall Netting and Other Rock Fall Netting and Other Products for Civil Engineering Purposes (Galvanized Steel Wire or Galvanized Steel Wire with polymer coating
• Corrugated Aluminium Sheet
• Wrought Aluminium Wire for Electrical Purposes
• Metribuzin, Technical - Specification First Revision
• Jute bags for packing 50 Kg sugar
• Steel Butt Hinges
• Footwear - Personal protective equipment – Part 3 Protective Footwear
• Textiles - Bed sheet and Pillow Cover
• Steel and Iron - Carbon And Low Alloy Billets, Blooms, Slabs And Bars For Manufacture Of Shell BodiesAnd Proof Shots Used In Defence Services
• Safety of household and similar electrical appliances – particular requirements – range hoods
• Footwear - Personal protective equipment – Part 4 Occupational Footwear
• Textiles - Insect nets for Agriculture and Horticulture purpose
• Laboratory glassware – Single volume pipettes
• Welded Low Carbon Steel Cylinders Exceeding 5 Litre Water Capacity For Low Pressure Liquefiable Gas - Requirements For Inspection And Reconditioning Of Used Lpg Cylinders (First Revision)
• Textiles - Nylon Knitted seamless gloves for tobacco harvesters
• Textiles - Jute Agro textiles for Growth of Plants and Suppression of Weeds
• Hand - Operated chain pulley block
• Cement Paint - Specification (Second Revision)
• Fish Feed - Specification: Part 2 Catfish Feed
• Textiles - Windshield nets for agriculture and horticulture purpose
• Textiles - Fencing nets for agriculture and horticulture purposes -made from mono filament yarns and combination of tape and mono filament yarns
• Sulphur Wettable Powders Specification
• Asbestos Cement Flat Sheets
• Textiles - High Density Polyethylene (HDPE) Laminated Woven Lay Flat Tube and Fittings for use in Rain Irrigation System
• Textiles - Laminated Woven Orchard Protection Covers
• Cycle – Rubber Tubes (Moulded or Jointed)
• Steel back flap hinges
• Drums, Large Open Top
• Solid drawn copper and copper alloy tubes for condensers and heat exchangers
• Copper wires for general engineering purposes
• V-Belts – Endless V-Belts for Industrial Purposes – General Purpose
• Square Tins – 15 Kilograms or litre for Ghee, Vanaspati, Edible Oils and Bakery
• Open-Jaw Wrenches (Spanners)
• Ring Slugging Wrenches (Spanners)
• Pan Head Screws With Type H or Type Z Cross Recess – Product Grade A
• Rubber Gaskets for Pressure Cookers
• Asbestos Cement Pressure Pipes and Joints
• Textiles — Composite Synthetic Fibre Ropes — Specification
• Steel and Iron - Soft Magnetic Iron Rods, Bars Flats and Sections
• Fibre Ropes — Polyamide — 3-, 4-, 8- and 12- Strand Ropes
• RoHS Certificate
• Autoclaved Reinforced Cellular Concrete Floor and Roof Slabs
• Floor springs (hydraulically regulated) for heavy doors
• Textiles - Laminated High Density Polyethylene (HDPE) Woven Geomembrane for Water Proof Lining
• Textiles - Sapling bags for growth of seedling /sapling
• Live Working Gloves of Insulating Material
• CEMENT BONDED PARTICLE BOARDS
• Electrical - AC static transformer operated watt-hour and VAR-hour meters, class 0.2S & 0.5S
• Irrigation equipment - Emitters
• Wire Ropes Used in Oil Wells and Oil Well Drilling
• Asbestos Cement Building Boards
• Electronic Type Fan Regulators
• Door closers (pneumatically regulated) for light doors weighing up to 40 kg
• Rim Latches
• Portland Pozzolana Cement-Part1 Fly-ash based
• Aluminium and Aluminium Alloy Bare Foil for Food Packaging
• Transmission Devices – V – Belts endless narrow V-Belts for industrial use
• Cement - Super sulphated cement
• Cement - Rapid hardening Portland cement
• Cement - White Portland Cement
• Cement - Oil well Cement
• Fibre Cement Flat Sheets
• Steel and Iron - 18 Percent Nickel Maraging Steel Bars and Rods
• Instantaneous Domestic Water Heater for use with Liquefied Petroleum Gas
• Electrical - Safety of household and similar electrical appliances-Room heaters
• Steel and Iron - Carbon And Carbon- Manganese Free- Cutting Steels
• Industrial safety helmets
• Cement - Hydrophobic Portland Cement
• Solar Cooker - Box Type - Specification Part 1 Requirements (Second Revision)
• Electrical - Residual current operated circuit breakers for household and similar uses–Part 2 Circuit breakers with integral overcurrent protection(RCVOs)
• Hexaconazole, Ec - Specification
• Cement - High Alumina Refractory Cement.
• Braided Nylon Ropes for Mountaineering Purposes
• Poly Aluminium Chloride
• Steel Wire Rope forhaulage
• Textiles - High Density Polyethylene (HDPE) laminated woven lay flat tube for irrigation purpose
• Textiles - Woven Ground covers for Horticulture Application
• Textiles — High Density Polyethylene (HDPE)/ Polypropylene (PP) Woven Sacks for Packaging of 50 kg Cement
• Footwear - Polyurethane sole, semirigid
• Tin Ingot - Specification (Fifth Revision)
• Textiles — Polypropylene (PP) Woven, Laminated, Block Bottom Valve Sacks for Packaging of 50 kg Cement
• Textiles — Polypropylene (PP)/ High Density Polyethylene (HDPE) Laminated Woven Sacks for Mail Sorting, Storage, Transport and Distribution
• Specification For 2 - Naphthylamine - 3 : 6 : 8 - Trisulphonic Acid, Technical
• Electrical - Safety of household and similar electrical appliances – Electric iron
• Electrical - Out door type Oil immersed Distribution Transformers upto and including 2500 kVA, 33 KV-specification Part 1 Mineral oil immersed
• Feeding Bottles - Plastic Feeding Bottles
• Specification For Maleic Anhydride, Technical (Second Revision)
• Stable Bleaching Powder Part 1 Household And Industrial Use
• Safety Glass -Specification Part 2 For Road Transport .
• Electric Iron
• Personal Fall Arrest Systems - Specification : Part 5 Connectors With Self-Closing And Self-Locking Gates
• Automotive vehicles– Pneumatic tyres for two and three-wheeled motor vehicles
• Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 2 Sheet Metal Wheel Rims Method of Tests and Requirements
• Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 3 Spoke Wheel Rims Method of Tests and Requirements
• Motorcycle Chains - Characteristics And Test Methods (First Revision)
• Fasteners – Cross Recessed Drilling Screws with Tapping Screw Thread Part 2 Countersunk Head
• Footwear - Solid PVC soles and heels
• Footwear - Polyvinyl chloride(PVC) industrial boots
• Footwear - Footwear for men and women for municipal scavenging work
• Copper Oxychloride Water Dispersible Powder Concentrate - Specification (Third Revision)
• Kitchen - Hand-held Blender
• Steel and Iron - Steel Tubes, Tubulars and Other Wrought Steel Fittings – Part 1 : Steel Tubes
• Legal Metrology – Material Measure of length – Steel tape measures
• Bolts, Nuts & Fasteners - Hexagon Head Bolts, Screws and Nuts of product Grade C Hexagon Head Bolts (Size Range M 5 to M 64)
• Room Air Conditioners- Specification Part 2 Split Air Conditioners
• Steel and Iron - Ferromolybdenum – Specification
• Dimethoate, Technical - Specification (Second Revision)
• Bolts, Nuts & Fasteners - Hexagon Head Bolts, Screws and Nuts of product Grades A and B – Hexagon Head Bolts (Size Range M 1.6 To M 64)
• Room Air Conditioners- Specification Part 1 Unitary Air Conditioners
• Steel and Iron - Specification for Ferro Vanadium
• Steel and Iron - Silicomanganese – Specification
• Cement - Portland Pozzolana Cement-Part 2 Calcined clay based
• Centrifugally cast (Spun) iron pressure pipes for water, gas and sewage
• Automotive vehicles - Pneumatic tyres for commercial vehicles-Diagonal and radial ply
• Portable Fire Extinguishers
• Cast Iron - Vertically cast – iron pressure pipes for water, gas and sewage
• Cables - Specification for PVC Insulated (Heavy Duty) Electric Cables Part 2 For Working Voltages from 3.3 kV up to and Including 11 kV
• Cables - Specification for PVC Insulated (Heavy Duty) Electric Cables Part 1 For Working Voltages up to and Including 1100 V
• Steel and Iron - Specification for Hard-drawn Steel Wire Fabric For Concrete Reinforcement
• Cast Iron - Cast iron/ductile iron drainage pipes and pipe fittings for over ground non-pressure pipelines socket and spigot series
• Drums, Large, Fixed Ends – Grade
• Steel and Iron - Plain hard-drawn steel wire for pre-stressed concrete Part 2: As drawn wire
• Steel and Iron - Carbon steel billets, blooms, slabs and bars for forgings.
• Cast Iron - Malleable cast iron pipe fittings
• Footwear - Leather safety boots and shoes for heavy metal industries
• Red Phosphorus
• Ring Wrenches (Spanners)
• Textiles - Curtains and Drapes
• Steel and Iron - Steel plates for pressure vessels for intermediate and high temperature service including boilers.
• Steel and Iron - Steel plates for pressure vessels used at moderate and low temperature
• Compounded Feeds for Cattle
• Steel and Iron - Hot rolled medium and high tensile structural steel
• Stabilized Hydrogen Peroxide
• Wood - Wooden flush door shutters (cellular and hollow core type) – Particle board and hardboard face panels
• Wood - Wooden flush door shutters (solid core type) – Plywood face panels
• Domestic Pressure Cooker
• Solid drawn copper tubes for general engineering purposes
• Steel and Iron - Specification for Cold – rolled Steel Strips For Springs.
• Steel Drums (Galvanized and Ungalvanized)
• Textiles - Clothing made of limited flame spread materials and material assemblies affording protection against heat and flame
• Safety Glass -Specification Part 1 Architectural, Building and General uses.
• B-twill Jute bags for packing foodgrains
• Non-metal helmet for firemen and civil defence personnel
• Steel and Iron - Carbon steel cast billet ingots ,billets, blooms and slabs for rerolling into steel for general structural purpose
• Steel and Iron - Steel for the manufacture of laminated springs (railway rolling stock) Part 1 Flat Sections – Specification.
• Steel and Iron - Carbon steel cast billet ingots, billets, blooms and slabs for re-rolling into structural steel (ordinary quality) – Specification
• Flat Transparent Sheet Glass.
• Steel and Iron - Grain oriented electrical steel sheet & strip (CRGO)
• Steel and Iron - Specification for Structural steel for construction of hulls of ships
• Medical Electrical Equipment Part 2 Particular Requirements For Basic Safety And Essential Performance Section 26 Electroencephalographs
• Wood - Particle boards of wood and other lignocellulosic materials (medium density) for general purpose
• Steel and Iron - Steel For the Manufacture of Volute And Helical Springs (for Railway Rolling Stock) – Specification .
• Welded low carbon steel gas cylinder exceeding 5 litre water capacity for low pressure liquefiable gases Part1 Cylinders for liquefied petroleum gas (LPG)
• Welded low carbon steel gas cylinder exceeding 5-litre water capacity for low pressure liquefiable gases Part 2 Cylinders for liquefiable gases other than LPG.
• Valve fittings for compressed gas cylinder excluding liquefied petroleum gas cylinders
• Steel and Iron - Steel Chequered Plates
• Combination Side Cutting Pliers
• Steel and Iron - Specification for Steel for the manufacture of volute, helical and laminated springs for automotive suspension.
• Cement - Masonry Cement
• Resin treated compressed wood laminates Resin treated compressed wood laminates (compregs) – For electrical purposes
• Bitumen Drums
• Laboratory glassware – Graduated measuring cylinders
• Yoke Type Valve Connection for Small Medical Gas Cylinders
• Steel and Iron - Low Carbon Galvanized steel wires formed wires and Tapes for armouring of Cables
• Centrifugally cast (Spun) iron spigot and socket soil, waste, ventilating and rainwater pipes, fittings and accessories
• Pipe Wrenches – Heavy Duty
• Steel and Iron - Tool and die steels – Specification
• Footwear - Safety Rubber Canvas Boots for Miners
• Pipe Wrenches –General Purpose
• Steel and Iron - Steel For Spring Washers
• Gypsum plaster boards – Specification: Part 1 plain gypsum plaster boards
• Helmet for riders of Two Wheeler Motor Vehicles
• Domestic Gas Stoves for use with Liquefied Petroleum Gases
• Textiles - Protective clothing for industrial workers exposed to heat
• Upholstered composites used for non-domestic furniture
• Household and similar electrical appliances – Safety – particular requirements for fans
• Copper rods and bars for general engineering purposes
• Kitchen - Domestic Electric Food Mixer (Liquidizers and Grinders) and Centrifugal Juicer
• Tools for Pressing Part 1 Round Punches with 60 Degrees Conical Head and Straight Shank
• Steel and Iron - Alloy Steel billets, blooms and slabs for forging for general engineering purposes.
• Steel and Iron - Carbon-chromium Steel for the Manufacture of Balls, Rollers and Bearing Races- Specification
• Steel and Iron - Steel Wires for Mechanical Springs- Part 4: Stainless Steel Wire
• Open Ended Slugging Wrenches (Spanners)
• Bolts, Nuts & Fasteners - Stainless steel Tower Bolts
• Steel and Iron - Half Round Mild Steel Wire For The Manufacture of Split Pins
• Steel and Iron - Steel wire for mechanical springs Part-2 oil hardened and tempered steel wire.
• Sodium Formaldehyde Sulphoxylate
• Phosphorous Trichloride, pure and Analytical Reagent
• Wrought aluminium and aluminium alloy bars, rods, tubes, sections, plates and sheets for electrical applications
• Fibre Ropes — Polypropylene Split Film, Monofilament And Multifilament ( PP2 ) and Polypropylene High-Tenacity Multifilament ( PP3 ) —3-, 4-, 8- and 12- Strand Ropes
• EC Grade Aluminium Rod produced by Continuous Casting and Rolling
• Wood - Fire retardant plywood
• Steel and Iron - Steel for hardening and tempering – Specification
• Steel and Iron - Steels For Die Blocks For Drop Forging
• Footwear - Industrial and protective rubber knee and ankle boots
• Footwear - All rubber gum boots and ankle boots
• Steel and Iron - Cold Rolled Steel Strips (Box Strappings).
• Steel and Iron - Steels for High Temperature Bolting Applications – Specification
• Footwear - Moulded solid rubber soles and heels
• Footwear - Sports Footwear for Professional Sports Footwear
• Alternating Current Direct Connected Static Prepayment Meters for Active Energy (Class1 and 2)
• Hubless centrifugally cast (Spun) iron pipes, fittings and accessories – Spigot series
• Capacitors - Power Capacitors of Self-healing Type for AC Power Systems having Rated Voltage up to 650V
• Cables - Specification for Shot Firing Cables (for use other than in shafts)
• Steel and Iron - Hot Rolled Steel Sheet, Plate and Strip for Forming and Flanging Purposes — Specification.
• Textiles - High Density Polyethylene (HDPE) woven beds for vermiculture
• Textiles - Poly Vinyl Chloride (PVC) Geomembranes
• Textiles - Geotextiles used in sub-grade separation in pavement structures
• Textiles - Geotextiles for permanent erosion control in hard armor systems
• Textiles - Geotextiles used in Subsurface Drainage Application
• Cement - Composite Cement- Specification.
• Steel and Iron - Specification for Malleable iron shots and grits for use in foundries
• A.C. Static Transformer Operated Watt Hour and Var-Hour Smart Meters, Class 0.2S, 0.5S and 1.0S
• Synthetic Micro-Fibres for use in Cement Based Matrix
• Storage Water Tank for All Glass Evacuated Tubes Solar Water Heating Systems
• All Glass Evacuated Tubes Solar Water Heating System
• Steel and Iron - Magnetic materials – specification for individual material – Fe based amorphous strip delivered in the semi-processed state.
• Textiles - High density polyethylene (HDPE) laminated woven lay flat tube for use in mains and submains of drip irrigation system
• Steel and Iron - Stress-Relieved, Low Relaxation Steel Wire for Pre-stressed Concrete
• Footwear - Moulded plastics footwear- Lined or Unlined polyurethane boots for general industrial use
• High Strength deformed stainless steel bars and wires for concrete reinforcement
• Textiles - Needle punched non-woven geobags
• Textiles — High Density Polyethylene (HDPE) Polypropylene (PP) Woven Sacks for Packaging of 25 kg Polymer Materials
• Textiles - Polypropylene Spun Bonded Non—Woven Crop Cover and Fruit Skirting Bags for Agriculture and Horticulture Applications
• Domestic Gas Stoves for use with Piped Natural Gas (PNG)
• Electric Cable for Photovoltic Systems for rated voltage 1500V DC
• Textiles - Propylene Spun bonded non—woven mulch mat for agriculture and horticulture applications
• Textiles - Harvest nets for agriculture and horticulture purposes
• Textiles - Fencing nets for agriculture and horticulture purposes – made from extruded polymer mesh
• Textiles - Polymeric strip or geostrip used as soil reinforcement in retaining structures
• Textiles - Reinforced HDPE membrane for effluents and chemical resistance lining
• Textiles - Disposable baby diaper
• Textiles - Plant Support Nets for Agriculture and Horticulture Purposes
• Textiles - Reusable Sanitary pad/ Sanitary Napkin/ Period Panties
• Household Refrigerating Appliances- Characteristics and Test Methods part-1 General Requirements
• Key locks for security equipment
• Textiles - Flexible Water Storage Tank for Agriculture and Horticulture Purposes
• Stainless Steel Seamless pipes and tubes for general service
• Steel and Iron - Hot Rolled and Cold Rolled Steel Strips Intended For Processing Of Semi/Fully Processed NonGrain Oriented Electrical Steel Or Fully Processed Grain Oriented Electrical Steel
• Steel and Iron - Hot- Dip galvanized/ galvannealed Steel Sheet and strips for Automotive Applications
• Three piece round open top metal cans for foods and beverages
• Steel and Iron - Oriented Electrical Steel Sheet and Strip- Semi-Processed Type- Specification.
• Automotive Vehicles Wheel Rims for Two and Three Wheeled Vehicles Part 1 Light Alloy Wheel Rims Method of Tests and Requirements
• Stationary storage type electric water heaters
• Medical - Clinical thermometers :Part1 Solid stem type
• Asbestos Cement Cable Conduits and Troughs
• Raised countersunk head screws (Common Head Style) with type H or type Z cross recess – Product grade A
• Cycle and Rickshaw Pneumatic Tyres
• Steel and Iron - Tinned Steel Wire For Banding Of Armatures And Rotors Part III Specific Requirements for non-magnetic banding wires
• Beds
• Computer Paper - Specification
• Bunk beds
• Vitreous China Sanitary Appliances -Specification Part 15 Specific Requirements Of Universal Water Closets (Third Revision)
• Specification For Electric Table Type Fans And Regulators (Third Revision)
• Cables - Specification for Thermocouple Compensating Cables
• Conveyor belts — Fire Resistant Conveyor Belting for Underground Mines and such other Hazardous Applications
• Irrigation Equipment- Sprinkler Pipes Part 2 Quick Coupled Polyethylene Pipes & Fittings
• Liquid off - Take valve fitting to gas cylinders or tanks (Mobile Or Static) for liquid petroleum gas (LPG)
• Plastics bib taps, pillar taps, angle valves and stop valves for hot and cold water services
• Sodium Chlorate
• Medical Electrical Equipment: Part 2 Particular Requirements For The Basic Safety And Essential Performance: Sec 13 Anaesthetic Workstation (First Revision)
• Dunnage Pallets Made From Recycled Packaging Wastes For Warehousing Application - Specification (First Revision)
• Preformed Fillers For Expansion Joints In Concrete Pavements And Structures(Non-Extruding And Resilient Type) Part 3 Polymer Based
• Textiles – Monoaxially Oriented High Density Polyethylene Tapes
• Vitreous China Sanitary Appliances - Specification Part 2 Specific Requirements of Washdown Water Closets
• Vitreous China Sanitary Appliances — Part 3 - Specific Requirements of Squatting Pans
• Vitreous sanitary appliances (Vitreous China) - specification: Part 4 Specific requirements of wash basins
• Vitreous sanitary appliances (Vitreous China) - Specification: Part 5 Specific requirements of laboratory sinks
• Vitreous China Sanitary Appliances : Specific Requirements of Urinals And Partition Plates
• VITREOUS SANITARY APPLIANCES (VITREOUS CHINA) – SPECIFIC REQUIREMENTS FOR ACCESSORIES FOR SANITARY APPLIANCES
• Automatic electrical controls for household and similar use part 2 particular requirements - section 9 Temperature sensing controls
• Cane Gur (Jaggery)
• Explosive Atmospheres – Equipment Protection by Intrinsic Safety "i"
• Protective Devices Against Diagnostic Medical X-Radiation Part 3: Protective Clothing, Eyewear And Protective Patient Shields
• EConduits for Electrical Installations- Rigid Plain Conduits of Insulating Materials
• Chlorpyrifos, technical
• Hexane, food grade
• Melamine (2,4,6 Triamino 1,3,5 Triazine)
• Hot rolled steel plate (Up To 6 Mm) sheet and strip for the manufacture of low pressure liquefiable gas cylinders
• Aluminium Conductors for Overhead Transmission Purposes - Part 1- Aluminium Stranded Conductors
• Imidacloprid, Technical
• AAluminium Alloy Stranded Conductors AluminiumMagnesium-Silicon type for Overhead Transmission purposes.
• Propeller Type a.c. Ventilating Fans
• Fittings for Rigid Non - Metallic Conduits
• conduits for electrical installations: Part 2 rigid steel conduits
• Conduits for Electrical Installations - Pliable SelfRecovering Conduits of Insulating Materials
• Winding Wires for Submersible Motors - Polyester and Polypropylene insulated wires
• Phenol (carbolic acid)
• Precast Concrete Pipes (with and without reinforcement)
• GLAZED STONEWARE PIPES AND FITTINGS
• Submersible Pumpsets
• COPPER ALLOY GATE, GLOBE AND CHECK VALVES FOR WATERWORKS PURPOSES
• Monoset Pumps for Clear, Cold water for agricultural and water supply purposes
• Polyether Polyols - Specification
• Silica-Asbestos-Cement Flat Sheets
• Agro Textiles - Shade Nets For Agriculture And Horticulture Purposes - Specification Part 2 Shade Nets Made From Mono Filament Yarns (First Revision)
• First-Aid Hose-Reel for Fire Fighting
• Cylindrical Metal measures for use in tests of Aggregates and Concrete
• Fire Hose Delivery Couplings, Branch Pipe, Nozzles and Nozzle Spanner
• SINGLE PHASE A.C. INDUCTION MOTORS FOR GENERAL PURPOSE
• Specification for sodium nitrate and potassium nitrate for glass compositions
• Agro Textiles - Shade Nets For Agriculture And Horticulture Purposes - Specification Part 1 Shade Nets Made From Tape Yarns (First Revision)
• Textiles Woven Roving Fabrics Of E Glass Fibre Specification Second Revision Of Is 11273
• In-Vitro Diagnostic Device - Automated Clinical Chemistry Analyzer - Part 1 Wet Chemistry Analyzer
• Deep well hand pumps
• HAND PUMP SUB-ASSEMBLIES
• Sodium Nitrite
• HAND PUMP STEEL COMPONENTS
• Hot Rolled Steel Sections for Doors, Windows and Ventilators
• Galvanized mild steel fire bucket
• Adjustable Axillary Crutches
• Table, Operation, Hydraulic, Major
• Positive Displacement type Air Compressors & Exhausters- Testing and Acceptance
• HAND PUMP BRASS/BRONZE OR STAINLESS STEEL CAST COMPONENTS
• Hand-Operated Universal Gearless Pulling and Lifting Machines
• HAND PUMP RUBBER COMPONENTS
• Tricycle - Hand Propelled
• Bed, intensive care
• HOUSEHOLD SEWING MACHINES
• Wooden ( Timber ) Pallets for Packaging, Storage and Transportation
• Openwell Submersible Pumpsets
• Bitumen Felts for Water Proofing and Damp-proofing
• CONCRETE MASONRY UNITS – AUTOCLAVED CELLULAR (AERATED) CONCRETE BLOCKS
• Fibre hardboards
• STEEL DOORS, WINDOWS AND VENTILATORS
• Ethylene Glycol - Specification (Third Revision)
• NTEGRAL WATERPROOFING COMPOUNDS FOR CEMENT MORTAR AND CONCRETE
• Cable Management - Cable Tray System And Cable Ladder System
• Heating Oil(Ldo) - Specification
• Textiles - Continuous Multifilament Polypropylene Yarns - Specification
• foot valves for water works purposes
• Horizontal centrifugal pumps for clear, cold water Part 2- General Purpose
• ROTATIONAL MOULDED POLYETHYLENE WATER STORAGE TANKS
• UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) SCREEN AND CASING PIPES FOR BORE/ TUBEWELLS
• IS 2547 (Part 1) : 1976
• POLYETHYLENE PIPES FOR WATER SUPPLY
• UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) PIPES FOR SOIL AND WASTE DISCHARGE SYSTEM FOR INSIDE AND OUTSIDE BUILDINGS INCLUDING VENTILATION AND RAIN WATER SYSTEM
• UCONCRETE PAVING BLOCKS
• Automatic Sprinkler Heads for Fire Protection Service
• Pesticide - Metalaxyl Ws - Specification
• Aluminium Phosphide Formulations - Specification (Second Revision)
• Textiles - Polyester Partially Oriented Yarn (Poy) - Specification (First Revision)
• Phenthoate Emulsifiable Concentrate (Ec) - Specification (First Revision)
• Ophthalmic Instruments - Perimeters (Iso 12866: 1999 + Amd 1: 2008, Mod)
• Diaphragm type (plastic body) float operated valves for cold water services
• Polyethylene-Aluminium-Polyethylene Composite Pressure Pipes for Hot and Cold Water Supplies
• SWING CHECK TYPE REFLUX (NON-RETURN) VALVES FOR WATER WORKS PURPOSES – SINGLE DOOR PATTERN
• GAS CARTRIDGES FOR USE IN FIRE EXTINGUISHERS
• Landing Valves
• LASTIC FLUSHING CISTERNS FOR WATER CLOSETS AND URINALS
• INJECTION MOULDED PVC SOCKET FITTINGS WITH SOLVENT CEMENT JOINTS FOR WATER SUPPLIES
• Copper Alloy Single Taps, Combination Tap Assemblies, Stop Valves and Single Lever Mixers for Water Services
• FABRICATED PVC-U FITTINGS FOR POTABLE WATER SUPPLIES
• PRECAST CONCRETE MANHOLE COVER AND FRAME
• Dry Chemical Powders for Fire Fighting – BC, ABC and D Types
• CERAMIC UNGLAZED VITREOUS ACID RESISTING TILES
• COMMERCIAL BURNERS USING LPG at INLET PRESSURE
• Wrought Aluminium and its Alloys-Drawn Tubes for General Engineering Purposes
• Steel Countersunk Head Wire Nails
• TWO PART POLYSULPHIDE BASED SEALANTS
• PORTLAND CEMENT CLINKER
• GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CEMENT, MORTAR AND CONCRETE
• GSTANDARD SAND FOR TESTING CEMENT
• VISOR FOR SCOOTER HELMETS
• Polyethylene Pipes For Sewerage and Industrial Chemicals and Effluent
• Prelaminated Medium Density Fibre Board
• PUnplasticized Polyvinyl Chloride (UPVC) Injection Moulded Fittings for Soil and Waste Discharge System for Inside and Outside Buildings Including Ventilation and Rain Water System
• Adhesives for use with Ceramic, Mosaic and Stone Tiles
• UNPLASTICIZED NON-PRESSURE POLYVINYL CHLORIDE (PVC-U) PIPES FOR USE IN UNDERGROUND DRAINAGE AND SEWERAGE SYSTEMS
• Chlorinated Polyvinyl Chloride (CPVC) Pipes for Potable Hot and Cold Water Distribution Supplies
• Aluminium Conductors for Overhead Transmission Purposes Part 2 Aluminium Conductors Galvanized Steel Reinforced
• Textiles - Medical Respirator - Specification
• Pesticide - Dodine Wp - Specification
• Ophthalmic Instruments - Tonometers
• Automatic Line Voltage Correctors (Step Type) For Domestic Use - Specification (First Revision)
• Acetylene Generators - Requirements (First Revision)
• Brass Glands For Pvc Cables - Specification
• Low-Voltage Switchgear And Controlgear: Part 3 Switches Disconnectors Switch-Disconnectors And Fuse-Combination Units
• Welded Steel Wire Fabric For General Use - Specification ( Third Revision )
• Multilayered Cross Laminated Sheets/Tarpaulins/Covers/Agricultural Films - Specification (Second Revision)
• Short Link Chain For Lifting Purposes Grade T (Types T, Oat And Dt), Fine-Tolerance Hoist Chain
• Medical Electrical Equipment Part 2 Particular Requirements For Basic Safety And Essential Performance Section 2 High Frequency Surgical Equipment And High Frequency Surgical Accessories First Revision
• Aluminium Conductors for Overhead Transmission Part 2 Aluminium Conductors Galvanized Steel Reinforced
• POWER OPERATED CHAFF CUTTER – SAFETY REQUIREMENTS
• Aluminium Conductors- Galvanized Steel –Reinforced for Extra High Voltage (400 kV and above), for Overhead Transmission Purposes
• Decorative Thermosetting Synthetic Resin Bonded Laminated Sheets
• Hollow steel sections for structural use
• General Purpose Ball Valves
• Irrigation Equipment — Polyethylene Pipes for Irrigation Laterals — Specification
• Textile — Bed Mattress
• AFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - ELECTRIC KITCHEN MACHINES
• BURNERS FOR OIL PRESSURE STOVES AND OIL PRESSURE HEATERS
• Electric Instantaneous Water Heaters
• Centrifugal Regenerative Pumps for Clear, Cold Water
• PVC WATER – STOPS AT TRANSVERSE CONTRACTION JOINTS FOR USE IN MASONRY AND CONCRETE DAMS
• ORIENTED UNPLASTICIZED POLYVINYL CHLORIDE (PVC-O) PIPES FOR WATER SUPPL
• CENTRIFUGAL JET PUMP
• RUBBER SEALS FOR HYDRAULIC GATES
• RCOMMON SALT FOR CHEMICAL INDUSTRIES
• PERFORMANCE REQUIREMENTS FOR CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINES FOR AGRICULTURAL PURPOSES (upto 19 kW)
• SODIUM BICARBONATE
• Performance Requirements for Small Size Spark Ignition Engines for Agricultural Water Pumps, Sprayers, Tillers, Reapers and other Similar Applications
• PERFORMANCE REQUIREMENTS FOR CONSTANT SPEED COMPRESSION IGNITION (DIESEL) ENGINES FOR GENERAL PURPOSES (upto 20 kW)
• Protection Of Arms And Hands Part 4 Protective Gloves Against Dangerous Chemicals And Micro-Organisms- Determination Of Resistance To Degradation By Chemicals
• Structured-Wall Plastics Piping Systems For Non-Pressure Drainage And Sewerage - Specification: Part 1 Pipes And Fittings With Smooth External Surface, Type A
• Power Threshers - Safety Requirements
• Specification for steel tubes for furniture purposes
• COMPRESSION TESTING MACHINE USED FOR TESTING OF CONCRETE AND MORTAR
• Fenvalerate EC
• Specification For Vibration Machine
• CYPERMETHRIN EC
• Sheet Rubber Jointing and Rubber Insertion Jointing
• CROP PROTECTION EQUIPMENT-ROCKER SPRAYERSPECIFICATION
• DICALCIUM PHOSPHATE, ANIMAL FEED GRADE.
• CYMOXANIL+MANCOZEB WETTABLE POWDER
• MANCOZEB, TECHNICAL-SPECIFICATION
• Structural Steel - Part 1 - Hot Rolled Medium and High tensile Steel
• Follow-Up Formula-Complementary Foods - Specification (First Revision Of Is 15757) Amendment - 1
• Cast Iron Fittings For Pressure Pipes For Water, Gas And Sewage - Specification (Third Revision)
• Pressed Ceramic Tiles - Specification (First Revision) Amendment - 2
• Fibre Cement Sheet -Lightweight Concrete Sandwich Panels - Specification
• Specification For Fireman's Axe (Second Revision)
• Weld Nuts - Specification Part 1 Hexagon Nuts (Second Revision)
• Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular Requirements Section 5 Circular Saws
• Alphacypermethrin, Wp - Specification
• Low-Voltage Switchgear And Controlgear : Part 4-1 Contactors And Motor Starters Electromechanical Contactors And Motor-Starters
• Low - Voltage Switchgear And Controlgear: Part 5 Control Circuit Devices And Switching Elements: Sec 1 Electromechanical Control Circuit Devices (First Revision)
• Lifebuoys - Specification
• Food For Special Medical Purpose Intended For Infants - Specification Amendment - 1
• Infant Milk Substitutes - Specification (Second Revision Of Is 14433) Amendment - 2
• Sodium Cyanide, Technical - Specification (First Revision)
• Hydrochloric Acid Specification Fifth Revision
• Rolling Bearings — Cylindrical Rollers — Specification ( First Revision )
• Single Row Deep Groove Ball Bearings — Specification ( First Revision )
• Single Row Cylindrical Roller Bearings Specification
• Milk-Cereal Based Complementary Foods Specification (Fifth Revision Of Is 1656) Amendment - 1
• Cheese - Specification (Second Revision Of Is 2785) Amendment - 1
• Household And Similar Electrical Appliances-Safety Part 2 Particular Requirements Section 74 Portable Immersion Heaters
• Whole Milk Powder - Specification (Sixth Revision Of Is 1165) Amendment - 1
• Chakka And Shrikhand - Specification (First Revision Of Is 9532) Amendment - 1
• Crop Protection Equipment — Hand-Operated Compression — Knapsack Sprayer — Specification (Sixth Revision) Amendment - 1
• Plastic Containers And Closures For Homoeopathic Pharmaceutical Preparations - Specification
• Paperbased Multilayer Laminated/Extruded Composite Cartons (Aseptic And Non-Aseptic) For Processed Liquid Food Products And Beverages — Specification
• Specification For Breathing Apparatus: Part 4 Escape Breathing Apparatus (Short Duration Self - Contained Type)
• Wrought Aluminium And Aluminium Alloy Bars, Rods, Sections, Extruded Tube, Hollow Sections And Profiles For General Engineering Purposes - Specification (Fourth Revision)
• Single-Use Sterile Rubber Surgical Gloves - Specification (First Revision)
• Passenger Lifts And Service Lifts Guide Rails For Lift Cars And Counterweights T-Type
• Commercial Cooking Ranges Including Grillers For Use With Liquefied Petroleum Gases - Specification (First Revision)
• Magnetic Materials - Specification For Individual Materials - Thin Electrical Steel Strip And Sheet For Use At Medium Frequencies
• Moulds For Use In Tests Of Cement, Concrete And Pozzolana (First Revision)
• Mini domestic water heater for use with piped natural gas (PNG)s
• Hand-Held Motor-Operated Electric Tools - Safety Part 2 Particular Requirements Section 6 Hammers
• Hand-Held Motor-Operated Electric Tools - Safety Part 2 Particular Requirements Section 3 Grinders Polishers And Disk-Type Sanders
• Specification For Copper Anodes For Electroplating (First Revision)
• Rolling Bearings -- Taper Rolling Bearings -- Tapered Rollers -- Specification
• Woodworking Tools - Chisels And Gouges (Third Revision)
• Pliers And Nippers: Part 1 Diagonal Cutting Nippers - Dimensions And Tests Values (Third Revision)
• Beta (Outflow) Valves For Gravity Type Flushing Cisterns - Specification
• Liquid Glass Cleaner — Specification ( Second Revision )
• Textile Floor Covering - Artificial Grass Carpet Made Of Synthetic Yarn For Landscape - Specification, Amendment No - 1
• Fluoropolymer Dispersions And Moulding And Extrusion Materials Part 1 Designation System (Second Revision)
• Bonded Mineral Wool - Specification Amendment - 1
• Sterile Hypodermic Needles For Single Use - Requirements And Test Methods (Fourth Revision)
• Medical Textiles - Absorbent Cotton (Sterile And Non-Sterile) - Specification
• Respiratory Protective Devices- Powered Filtering Devices Incorporating A Helmet Or Hood- Specification
• Aluminium Sulphate, Non - Ferric - Specification (Third Revision)
• Specification For Air Circulator Type Electric Fans And Regulators
• Propylene Glycol, Food Grade - Specification
• Steel Wire Ropes For Aerial Ropeways - Specification Part 1 Hauling And Carrying Hauling Rope (Second Revision)
• Poly- Laminated aluminium cable wrap
• Chlorine Tablets - Specification (Third Revision)
• Oriented Strand Boards - Specification
• Spiral Welded Pipes - Specification (Second Revision)
• Disinfectant Fluids, Phenolic Type - Specification ( Sixth Revision )
• Cold Formed Welded Carbon Steel Square And Rectangular Hollow Sections For Mechanical, General Engineering And Decorative Purposes - Specification
• Solvent Cements For Chlorinated Poly (Vinyl Chloride) (Cpvc) Plastic Pipe And Fittings
• Solid Bleached Sulphate Board - Specification ( First Revision )
• Coated Folding Box Board For General Consumer Product Packaging - Specification (First Revision)
• Wire Rope Slings And Sling Legs - Specification (Second Revision)
• Tricycle Single Hand Propelled Rightleft (Junior Size) - Specification (First Revision)
• Intravascular Catheters - Sterile And Single - Use Catheters: Part 5 Over - Needle Peripheral Catheters (First Revision)
• Rheostats - Specification (First Revision)
• D.c. Moving Coil Galvanometers - Specification (First Revision)
• Textiles Handloom Cotton Bed Sheets Specification
• Textiles - Polyester Blended Woven Shirting For Uniforms
• Footwear - Canvas Shoes Rubber Sole
• Wear And Abrasion Resistant Steel Sheet And Plate - Specification Amendment-1
• Drywall Screws – Specification
• Barium Sulphate Pigments For Paints - Specification (Second Revision)
• Solder Wire - Solid And Flux Cored - Specification (Third Revision)
• Sulphuric Acid - Specification (Fifth Revision)
• Refined Nickel- Specification (First Revision)
• Electric Welding Accessories - Specification (First Revision)
• Beta Picoline - Specification
• Medical Textiles — Absorbent Cotton Gauze — Specification ( Fifth Revision )
• Indigo Carmine, Food Grade - Specification (Third Revision)
• Polycarbonate Moulding And Extrusion Materials - Specification (First Revision)
• Preformed Fibrous Pipe Insulation - Specification
• Toluene - Specification (Third Revision)
• Styrene (Vinyl Benzene) - Specification (Third Revision)
• Irrigation Equipment - Polyethylene Pipes For Irrigation Laterals - Specification (First Revision)
• Compressed Natural Gas Cylinder Valve Integrated With Solenoid Operation (Remotely Controlled) For Automotive Use - Specification
• Brilliant Blue Fcf, Food Grade - Specification (Third Revision)
• Kadahi - Specification
• Glass Fibre Reinforced Plastics (Grp) Pipes, Joints And Fittings For Use For Sewerage, Industrial Waste And Water (Other Than Potable) - Specification
• Fire Resisting (Insulating) Filing Cabinets - Specification (Second Revision)
• Modular Lower Limb Orthotic Components - Specification Part 7 Orthotic Joint Bars, Ankle And Knee (Upper And Lower) (First Revision)
• Sunset Yellow Fcf, Food Grade - Specification (Fourth Revision)
• Mineral Mtxtures For Supplementing Poultry Feeds - Specification (First Revision)
• Specification For Polyethylene Material For Moulding And Extrusion (Third Revision)
• Tartrazine, Food Grade - Specification (Third Revision)
• General Purpose Glass Thermometers - Specification Part 1 Solid-Stem Thermometers (Third Revision)
• Sodium Hypochlorite Solution - Specification: Part 1 Household And Industrial Use (Second Revision)
• Specification For Exploders
• Textiles - Light Weight Jute Sacking Bags For Packing 50 Kg Pulses And Soyabean - Specification
• Textiles - Light Weight Jute Sacking Bags For Packing 35 Kg Groundnut With Shell - Specification
• In-Vitro Diagnostic Devices - Elisa Plate Reader
• Primary Lead - Specification (Fifth Revision).
• Grinding Media Rolledforged Carbon And Carbon - Chromium Steels - Specification First Revision
• Agricultural Irrigation Equipment - Manually Operated Serviceable Plastics Valves - Specification
• Electric Kettles And Jugs For Household And Similar Use - Specification (Fourth Revision)
• Pesticides - 2, 4 - D Sodium Salt, Technical - Specification
• Textiles - Viscose Rayon Cut Staple (Spun) Yarn - Specification ( Second Revision )
• Profenofos + Cypermethrin Emulsifiable Concentrate - Specification
• Zinc Sulphate Heptahydrate, Agricultural Grade - Specification (First Revision)
• H Acid - Specification ( Second Revision )
• Mancozeb Wettable Powder - Specification (First Revision)
• Imidacloprid Sl - Specification (Amendment - 2)
• Powder Hair Dyes — Specification ( Third Revision )
• Pulverized Fuel Ash - Lime Bricks - Specification (First Revision)
• Monocrotophos, Soluble Concentrate (Sl) - Specification (Third Revision)
• Irrigation Equipment - Micro Sprayers - Specification
• Toilet Soap, Liquid - Specification (Third Revision)
• Plastic Chairs For General Purposes - Specification ( First Revision )
• Chlorpyrifos, Emulsifiable Concentrates - Specification (First Revision)
• Iron Castings With Spheroidal Or Nodular Graphite - Specification (Third Revision)
• Fertilizer And Chemical Injector System : Part 3 Fertilizer Tank - Specification
• Medical Electrical Equipment Part 2-61: Particular Requirements For Basic Safety And Essential Performance Of Pulse Oximeter Equipment
• Ethyl Acetate - Specification (Fourth Revision)
• Aluminium Ingots, Billets And Wire Bars (Ec Grade) (Fourth Revision)
• Quinalphos Emulsifiable Concentrate Specification Second Revision
• Hexaconazole, Suspension Concentrate (Sc) - Specification
• Mustard And Rapeseed Oilcake As Livestock Feed Ingredient - Specification
• Specification For Primary Aluminium Ingots For Remelting For General Engineering Purposes (Second Revision)
• Ballistic Shields - Specification
• Paint Coal Tar Epoxy, Two Pack, Black And Brown (Base And Hardner) - Specification
• Medical Electrical Equipment: Part 2 Particular Requirements For The Basic Safety And Essential Performance: Sec 4 Cardiac Defibrillators (First Revision)
• Leagal Metrology - Gas Volume Meters: Part 2 Diaphagm Gas Meters
• Sterilization Of Health Care Products Common Requirements For Sterilizers For Terminal Sterilization Of Medical Devices In Health Care Facilities
• Specification For Zinc Phosphide, Technical
• Ferritic-Pearlitic Engineering Steels For Precipitation Hardening From Hot-Working Temperatures
• Specification For Rubber, Raw, Natural (Third Revision)
• Assembly Tools For Screws And Nuts - Driving Parts For Hand - Operated Square Drive Socket Wrenches: Part 2 Dimensions And Tests (Second Revision)
• Textiles - Glass Fibre Chopped Strand Mat For The Reinforcement Of Epoxy, Vinyl Ester, Phenolic And Polyester Thermoset Resin Systems - Specification (Second Revision Of Is 11551)
• Textiles - Glass Fibre Rovings For The Reinforcement Of Polyester, Phenolic, Vinyl Ester And Of Epoxide Thermoset Resin Systems - Specification (Second Revision Of Is 11320)
• BIS Consultant
• Flexible Rubber Tubing For Liquefied Petroleum Gas - Specification (Second Revision)
• Industrial Coke - Specification (Fourth Revision)
• Imidaclopiud Ws - Specification
• Ophthalmic Instruments - Eye Refractometers
• Medical Textiles — Bio-Protective Coveralls — Specification (First Revision)
• Outdoor/Indoor Type Liquid Immersed Distribution Transformers Up To And Including 2 500 Kva, 33 Kv — Specification Part 3 Natural/Synthetic Organic Ester Liquid Immersed
• Specification For Epoxy Resin, Hardeners And Epoxy Resin Compositions For Floor Topping
• Irrigation Equipment - Rotating Sprinkler : Part 1 Design And Operational Requirements (First Revision)
• Specification For High Density Polyethylene (Hdpe) Crates For Milk Satchets
• Ceramic (Vitreous China) Flushing Cisterns For Water Closets And Urinals - Specification (Sixth Revision)
• Aluminium Phosphide Powder Formulation - Specification (First Revision)
• Pesticide - Bifenthrin Wettable Powder - Specification
• Specification For Density Hydrometers: Part 1 Requirements (First Revision)
• Bicycles — Hub Assembly — Specification (Fourth Revision)
• Specification For Steam Irons (First Revision)
• Specification For Preformed Rigid Polyurethane (Pur) And Polyisocyanurate (Pir) Foams For Thermal Insulation
• Rubber Hoses For Agricultural Spraying (Third Revision)
• Concrete Nails - Specification
• Medical Electrical Equipment: Part 2 - 30 Particular Requirements For Basic Safety And Essential Performance Of Automated Non - Invasive Sphygmomanometers
• Specification For Steel Shots For Use In Foundries (First Revision)
• High Density Polyethylene Films (First Revision)
• Ziram Suspension Concentrate (Sc)- Specification (First Revision)
• Specification For Cast Iron Detachable Joints For Use With Asbestos Cement Pressure Pipes (First Revision)
• Benzothiazyl - 2 - Cyclohexyl Sulphenamide (Cbs) - Specification (Second Revision)
• Cover Paper - Specification (First Revision)
• Teats For Feeding Bottles - Specification (First Revision)
• Gas Testing Flame Safety Lamps — Specification ( Second Revision )
• Hot Press Moulded Thermosetting Glass Fibre Reinforced Polyester Resin (Grp) Sectional Water Storage Tanks: Part 1 Specification For Panels: Part 2 Guidelines For Assembly, Installation And Testing
• Carbon Papers - Handwriting - Specification (Second Revision)
• High Density Polyethylene (Hdpe)/Polypropylene (Pp) Woven Sacks For Packing Of Solid Ammonium Nitrate For Explosives - Specification
• Fumed Silica Specification
• Textiles - Continuous Filament Polyamide (Nylon 6) Yarn - Specification ( Second Revision )
• Oxidation Hair Dyes ( Liquid / Gel / Cream) — Specification ( Fourth Revision )
• Conveyor And Elevator Textile Belting - Specification Part 1 General Purpose Belting (Fifth Revision)
• Conveyor And Elevator Textile Belting - Specification: Part 5 Fire Resistant Belting For Surface Application
• Caprolactam - Specification (First Revision)
• Specification For De - Odourizing - Cum - Disinfectant Fluids
• Ready Mixed Paint Air Drying Red Oxide Zinc Chrome Priming -Specification (Fourth Revision)
• Sand For Plaster - Specification (Second Revision)
• Horizontal Centrifugal Pumps For Clear, Cold Water - Specification: Part 1 Agricultural And Rural Water Supply Purposes (Fourth Revision)
• Laminated Veneer Lumber Specification
• 4,4-Diaminostilbene-2,2-Disulphonic Acid(First Revision)
• Specification For Pvc Coated Fabrics For Footwear Industry
• Tin Or Tin - Lead Coated Copper Wire - Specificaiton (First Revision)
• Textiles Elastomeric Yarn Specification
• Sodium Hydrosulphite - Specification (Second Revision)
• Thiram Technical - Specification Second Revision
• Thiram Powder For Dry Seed Treatment - Specification (Second Revision)
• Packaged Natural Mineral Water - Specification Third Revision
• Prestressed Concrete Pipes (Including Specials) - Specification (Third Revision)
• Thiophanate Methyl, Technical - Specificaiton
• Baby Toilet Soap - Specification (First Revision)
• Acetaldehyde - Specification (First Revision)
• Normal Butyl Acetate - Specification (Third Revision)
• Specification For General Purpose Cutting Oil, Soluble (Second Revision)
• Textiles — Polyester Fibre Filled Pillow — Specification
• BIS Certificate / Certification
• Timber Door, Window And Ventilator Frames - Specification
• Silica Fume - Specification
• Specification For Glass Tableware (First Revision)
• Amendment No. 1 To Is 17786: 2022, Medical Textiles — Underpad — Specification
• Crop Protection Equipment - Hand-Operated Knapsack Sprayer, Piston Type - Specification (Fourth Revision)
• Specification For Tables, Operation, Hydraulic, Minor
• Textiles - Roundslings Made Of Man-Made Fibres For General Service - Specification (First Revision)
• Portland Calcined Clay Limestone Cement - Specification
• Personal Fall Arrest Systems - Specification : Part 3 Self-Retracting Lifelines
• Multilayer (Pe-Al-Pe) Plastic Piping Systems For Indoor Gas Installations With A Maximum Operating Pressure Up To And Including 500 Kpa (5 Bar) - Specification
• Aluminium Alloy Hardeners (Master Alloys) - Specification (Second Revision)
• Phosphor Bronze Sheet, Strip And Foil - Specification (Second Revision)
• Personal Fall Arrest Systems - Specification : Part 8 Flexible Horizontal Lifeline Systems
• Reinforcement Couplers For Mechanical Splices Of Steel Bars In Concrete - Specification (First Revision)
• Medical Electrical Equipment: Part 2 Particular Requirements For The Basic Safety And Essential Performance: Sec 16 Haemodialysis, Haemodiafiltration And Haemofiltration Equipment
• Safety Of Household And Similar Electrical Appliances: Part 2 Particular Requirements: Sec 15 Appliances For Heating Liquids (First Revision)
• Personal Fall Arrest Systems - Specification : Part 4 Vertical Rails And Vertical Lifelines Incorporating A Sliding-Type Fall Arrester
• Sisal Ropes - Specification Part 1 Untarred Varieties (Fourth Revision)
• Textiles Country Jute Twine - Specification (Third Revision)
• Gypsum For Agricultural Use - Specification (Second Revision)
• Polyethylene Containers For The Transport Of Materials - Specification (Second Revision)
• Putty For Use On Window Frames - Specification (Second Revision)
• Fire Doors And Doorsets - Specification (First Revision)
• Handpump - Shallow Well - Specification (Second Revision)
• Specification For Fire-Resistant Brattice Cloth (First Revision)
• Brazed Low Carbon Steel Gas Cylinders Not Exceeding 13 Litre Water Capacity Specification
• Leather Gauntlets And Mittens Specification
• Alumino - Ferric - Specification (Fifth Revision)
• Specification For Cervical Collar (First Revision)
• Seamless Steel Cylinders For On - Board Storage Of Compressed Natural Gas As A Fuel For Automotive Vehicles - Specification (First Revision)
• Specification For Hand, Mechanical
• Bromine Technical Specification
• Specification For Crow - Bars And Claw - Bars (Second Revision)
• Orthophosphoric Acid — Specification ( Third Revision )
• Bamboo Mat Board For General Purposes -Specification
• Anaesthetic Machines For Use With Humans (First Revision)
• Specification For Hand - Rotary Duster : Part 1 Belly - Mounted Type (Second Revision)
• Surgical Rubber Gloves - Specification (First Revision)
• Moulded High Density Fibre Hdf Panelled Door Shutters - Specification ( First Revision )
• Aluminium For Use In Iron And Steel Manufacture - Specification (Third Revision)
• BIMFA Certificate
• Copper Sulphate Specification
• Specification For Fire Bells (Second Revision)
• Eye And Face Protection For Occupational Use : Part 1 General Requirements (First Revision)
• Rubber Hoses And Hose Assemblies For Water Suction And Discharge - Specification (Third Revision)
• Medical Textiles Nonwoven Wipes Specification
• Unplasticized Pvc Pipes For Potable Water Supplies - Specification (Fourth Revision)
• Specification For Iso - Butyl Alcohol
• Polyester Pet Strapping Specification
• Specification For General Purpose Machinery And Spindle Oils: Part 1 Machinery Oils (Second Revision)
• Specification For Smoke Detectors For Use In Automatic Electrical Fire Alarm System
• Acid Oil - Specification (First Revision Of Is 12029)
• Acrylonitrile - Specification (First Revision)
• Gas Filters And Combined Filters Used In Respiratory Protective Equipment - Specification
• Danger Notice Plates (First Revision)
• Steel Flush Door Shutters - Specification
• Internal Combustion Engine Crankcase Oils For Automotive Application (Diesel And Gasoline) - Specification (Third Revision)
• Specification For Single Texture Rubberized Waterproof Fabrics
• Stone-Polymer Composite Flooring Tiles And Planks - Specification
• Beehives - Specification (Fourth Revision)
• Plastics - Ethylene-Vinyl Acetate (Eva) Moulding And Extrusion Materials : Part 1 Designation System And Specification
• Specification For Hand Operated Square Drive Socket Wrenches (First Revision)
• Methyl Acrylate - Specification
• Ethyl Acrylate - Specification
• Plastics Collapsible Containers For Human Blood And Blood Components Part 1 Conventional Containers First Revision
• Specification For Magnesium Sulphate (Epsom Salts) (First Revision)
• Prestressed Concrete Circular Spun Poles For Overhead Power, Traction And Telecommunication Lines -
• Precast Reinforced Concrete Planks And Joist For Roofing And Flooring - Specification
• Precast Reinforced Concrete Street Lighting Poles
• Particle Filters Used In Respiratory Protective Equipment - Specification
• Rubber Hoses And Hose Assemblies For Measured Fuel Dispensing - Specification (Fourth Revision)
• Specification For Ethylene Oxide (First Revision)
• Urea , Technical - Specification (Second Revision)
• BIS Certificate Consultant in Aurangabad
• Softball Specification
• Indian Standard Specification For Barbell Set First Revision
• Specification For Steeplechase Hurdles First Revision
• Ring Used In Gymnastics - Specification
• Shuttlecocks Specification
• Ferrosilicomagnesium - Specification
• Metal Chairs For Office Purposes Specification Part 2 Revolving And Tilting
• Coconut Fatty Acids - Specification (First Revision Of Is 12069)
• Polyester Polyol - Specification
• Specification For Air - Screen Seed Cleaner
• Equipment For Manufacture Of Fortified Rice Kernel - Specification
• Specification For Sodium Tripolyphosphate Anhydrous Technical (Second Revision)
• Polyurethane Full Gloss Enamel (Two Pack) - Specification (First Revision)
• Cycles - Safety Requirements For Bicycles (Second Revision)
• Specification For Polypropylene And Its Copolymers For Its Safe Use In Contact With Foodstuffs, Pharmaceuticals And Drinking Water
• Specification For Ethylene Dichloride (Third Revision)
• Enamel Exterior (A) Undercoating, (B) Finishing
• GHP Certificate
• Equipment For Manufacture Of Fortified Rice - Specification
• Fortified Rice Kernels-Specification
• Specification For High Speed Tool Steels (First Revision)
• Cationic Modified Bitumen Emulsion - Specification Amendment - 2
• Tebuconazole, Technical - Specification
• Apparatus For Determination Of Milk Fat By Gerber Method - Specification (Third Revision)
• Modular Panel For Security Of Premises Specification
• Plastics - Thermoplastic Polyurethanes For Moulding And Extrusion : Part 1 Designation System And Specifications (First Revision)
• Chlorinated Polyvinyl Chloride ( C P V C ) Fittings For Potable Hot And Cold Water Distribution Supplies - Specification
• Plastics Crates For Fruits And Vegetables - Specification
• Specification For Cottonseed Oilcake As Livestock Feed Ingredient (Second Revision)
• Specification For Lancing Pipes
• Bypass Protein Feed For Cattle - Specification (First Revision)
• Industrial Emergency Showers, Eye And Face Fountains And Combination Units - Specification (First Revision)
• Sattu - Specification
• White Cement Based Polymeric Putty
• Polycarbonate Sheets - Specification
• Metal Polish, Liquid - Specification (First Revision)
• Toilet Soap - Specification (Third Revision)
• Personal Fall Arrest Systems - Specification : Part 2 Lanyards And Energy Absorbers
• Specification For Hospital Rubber Sheetings (First Revision)
• Automotive Hydraulic Brake Fluid, Heavy Duty - Specification (Third Revision)
• Ventilation Ducting - Vinyl Coated, Flexible And Semi-Rigid - Specification (Second Revision)
• Medical Electrical Equipment Part 2 Particular Requirements For The Basic Safety And Essential Performance Section 25 Electrocardiographs
• Packaging Of Electric Detonator: Part 2 Corrugated Fibreboard Cases
• Specification For Common Proofed Canvas/Duck And Paulins (Tarpaulins) (Second Revision)
• Specification For School Bag
• Specification For Industrial Safety Nets
• Coconut Oil - Specification (Third Revision)
• Ready Mixed Paint, Brushing, Wood Primer - Specification (Second Revision)
• Fish Feed - Specification: Part 3 Marine Shrimp Feed
• Latex Foam Rubber Products - Specification (First Revision)
• Hexaconazole + Zineb, Wettable Powder (Wp) - Specification
• Fire Blanket - Specification ( First Revision )
• Sulfamic Acid - Specification
• Specification For High Pressure Sodium Vapour Lamps: Part 1 General Requirements And Tests
• Specification For Body Level Hearing Aids
• Lactometers - Specification
• App Modified Bituminous Waterproofing And Damp-Proofing Membrane With Polyester Reinforcement - Specification
• Mineral Filled Sheathed Heating Elements
• Quality Tolerances For Water For Storage Batteries - Specification (Third Revision)
• Cotton Drills - Specification (Fourth Revision)
• Specification For Cotton Cellular Shirting (Second Revision)
• Washable Distemper - Specification (Third Revision)
• Specification For Slipper, Rubber
• Polyethylene Mulch Films For Agriculture And Horticulture - Specification
• Direct Action Hand Pumps - Specification (First Revision)
• Metal Waste Paper Bins - Specification
• Steel Clothes Lockers - Specification
• Specification For Hot Air Sterilizers (First Revision)
• N-(1,3 Dimethylbutyl)-N-Phenyl Paraphenylenediamine (6Ppd)- Specification
• Who Needs a BIS CRS Certificate
• Three - Phase Squirrel Cage Induction Motors For Centrifugal Pumps For Agricultural Application - Specification (First Revision)
• Specification For Carburizing Steels For Use In Bearing Industry (First Revision)
• Specification For Edible Groundnut Flour (Expeller Pressed) (First Revision)
• Azotobacter Chroococcum Inoculants
• Polyethylene Fittings For Use With Polyethylene Pipes For The Supply Of Gaseous Fuels - Specification: Part 3 Electro Fusion Fittings
• Specification For Ready Mixed Paint, Brushing, Bituminous, Black, Acid, Alkali, Water And Chlorine Resistlng (First Revision)
• Cashew Kernels - Specification (First Revision)
• Phosphoric Acid, Food Grade - Specification (First Revision)
• Titanium Dioxide, Anatase, For Paints - Specification ( Fourth Revision )
• Laboratory Glassware - Burettes (Third Revision)
• Drinking Water - Specification (Second Revision)
• Conveyor And Elevator Textile Belting - Specification Part 4 : Hygienic Belting (Second Revision)
• Industrial Bitumen - Specification (Third Revision) Amendment - 2
• Shoe Polish, Paste - Specification (Third Revision)
• Sealing Wax - Specification (First Revision)
• Elastomer Insulated Cables With Limited Circuit Integrity When Affected By Fire - Specification
• Sterile Single-Use Syringes, With Or Without Needle, For Insulin ( Second Revision )
• Specification For Pyrethrum Emulsifiable Concentrates (First Revision)
• Coarse And Fine Aggregate For Concrete - Specification (Third Revision)
• Specification For Fenthion Ec (First Revision)
• Specification For Slotted Countersunk Head Wood Screws
• Branch Pipe, Universal For Fire Fighting Purpose - Specification (Second Revision)
• Galvanized Strand For Earthing - Specification (First Revision)
• Life Jackets - Specification (First Revision)
• Metalaxyl Mancqzeb Wp - Specification
• Specification For Building Limes (Third Revision)
• Starters For Fluorescent Lamps (Third Revision)
• Specification For Tungsten Filament Miscellaneous Electric Lamps (First Revision)
• Specification For Steam Sterilizers: Part 1 Horizontal Cylindrical And Horizontal Rectangular Steam Sterilizers, Pressure Type (For Hospital And Pharmaceutical Use) (Second Revision)
• Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) - Specification (Fourth Revision)
• Roasted Chicory Powder - Specification (Third Revision)
• Specification For Common Salt (Fourth Revision)
• Galvanized Steel Chain Link Fence Fabric - Specification (Second Revision)
• Specification For Cast Copper Alloy Screw Down Bib Taps And Stop Valves For Water Services (Third Revision)
• Chequered Cement Concrete Tiles - Specification (First Revision)
• Specification For Guide And Rubbing Ropes (First Revision)
• Iodized Salt, Vacuum Evaporated Iodized Salt And Refined Iodized Salt - Specification (Second Revision)
• Variable Flow Type Air - Permeability Apparatus (Blaine Type) - Specification (First Revision)
• Specification For Bedsteads, Hospital, General Purposes (First Revision)
• Preformed Fillers For Expansion Joint In Concrete Pavement And Structures (Non Extruding And Resilient Type): Part 1 Bitumen Impregnated Fibre - Specification
• Plastic Translucent Sheets Made From Thermo - Setting Polyester Resin (Glassfibre Reinforced) - Specification
• Blades, Surgical, Detachable (Bard Parker Type) And Handles - Specification (Fourth Revision)
• Neem Based Ec Containing Azadirachtin - Specification
• Locked Coil Winding Ropes - Specification (Second Revision)
• Bituminous Compounds For Waterproofing And Caulking Purposes - Specification (Second Revision)
• Specifications For Particular Types Of Winding Wires: Part 13 Polyester Or Polyesterimide Overcoated With Polyamide - Imide Enamelled Round Copper Wire, Class 200 (First Revision)
• Specification For Particular Types Of Winding Wires: Part 8 Polyesterimide Enamelled Round Copper Wire, Class 180 (First Revision)
• Trays, Instruments - Specification (Second Revision)
• Specification For Water Stills For Pyrogen - Free Distilled Water (Second Revision)
• Solvent Cement For Use With Unplasticized Polyvinyl Chloride Plastic Pipe And Fittings - Specifications
• Specification For Modular Lower Limb Orthotic Components: Part 2 Stirrups, Split
• Cycle Chains - Characteristics And Test Methods
• Industrial Safety Belts And Harnesses - Specification (Third Revision)
• Specification For Crane Rail Sections (First Revision)
• Concrete Masonry Units - Specification: Part 1 Hollow And Solid Concrete Blocks (Third Revision)
• Vault (Strong Room) Doors Part 1 Specification (Third Revision) Amendment No - 1
• Cladding Films For Greenhouse / Polyhouse - Specifications (First Revision)
• Automotive Vehicles - Brake Hose Assemblies Forhydraulicbraking Systems Used With Non - Petroleum Base Brake Fluid Specification (Third Revision)
• Specification For Malathion Water Dispersible Powder Concentrates
• Specification For Sphygmomanometers, Mercurial (Second Revision)
• Solar Photovoltaic Water Pumping Systems Part 1 Centrifugal Pumps Specification
• Compression Type Tubular Terminal Ends For Aluminium Conductors Of Insulated Cables - Specification (First Revision)
• Specification For Trolleys, Stretcher
• Bromadiolone Cb - Specification
• Bed, Fowler's, Hospital
• Profenofos Emulsifiable Concentrate - Specification
• Fabricated Polyethylene Fittings For Water Supply - Specification (First Revision)
• Pull Handles Specification
• Prelaminated Cement Bonded Particle Board - Specification
• Specification Polyvinyl Acetate Dispersion Based Adhesives For Wood
• Specification For Forged Steel, Socket - Welding Fittings (First Revision)
• Tubular Steel Poles For Overhead Power Lines
• Rotational Moulded Polyethylene Water Storage Tanks - Specification (First Revision)
• Safety Devices For Protection Against Excessive Pressure Part 2 Bursting Disc Safety Devices (Second Revision Of Is 12370 )
• Specification For Formic Acid (First Revision)
• Amendment No. 1 To Is 1628 : 1986 Specification For Axle Oil (Second Revision)
• Tools For Pressing Punches Part 2 Punches With Cylindrical Head And Straight Or Reduced Shank (Second Revision)
• Nickel Salts For Electroplating - Specification (Third Revision)
• Rubber Seals Joint Rings For Water Supply Drainage And Sewerage Pipelines Specification For Materials ( Third Revision )
• Hand-Held Motor-Operated Electric Tools Safety Part 2 Particular Requirements Section 1 Drills And Impact Drills
• Rubber Hoses Textile-Reinforced For Compressed Air Specification ( Sixth Revision )
• Textiles - Polyester Industrial Yarn - Specification (First Revision)
• Modular Lower Limb Orthotic Components - Specification Part 6 Orthotic Hip Joint (Joint Unit, Hip Drop Lock) (First Revision)
• Rehabilitation Equipment - Wheelchairs, Folding, Junior Size - Specification (Second Revision)
• Steel and Iron - Heat-Treated Steels Alloy and Free-Cutting Steels — Ball and Roller Bearing Steels.
• Bicycle - Bicycle Rims - Specification (Fourth Revision)
• Air Drying Enamel Paint For Architectural And Industrial Applications - Specification (Fifth Revision)
• Medical Electrical Equipment Part 2 Particular Requirements For The Basic Safety And Essential Performance Section 50 Infant Phototherapy Equipment
• Wheel Bearing Grease - Specification (First Revision Of Is 10647))
• Aluminium And Aluminium Alloys Ingots For Remelting And Castings For General Engineering Purposes - Specification (Fourth Revision)
• Aluminium Alloy Milk Cans - Specification (Third Revision)
• Specifications For Particular Types Of Winding Wires: Part 34 Polyester Enamelled Round Copper Wire, Class 130 L (First Revision)
• Textiles - Synthetic Hook And Loop Tape Fasteners For Consumer Goods - Specification (Fourth Revision)
• Flexible Intermediate Bulk Containers (Fibcs) - Specification (First Revision)
• Knives - Specification
• Note Sorting Machines- Specifications
• Commutators For Electrical Machines - Specification
• Stainless steel butt hinges
• Synthetic Resin Adhesives For Plywood (Phenolic, Aminoplastic And Bio-Materials Based) - Specification ( Third Revision )
• Textiles - Polyester Continuous Filament Fully Drawn Yarns - Specification (First Revision)
• Iron Oxide Pigments For Paints - Specifications (Third Revision)
• Low - Voltage Switchgear And Controlgear: Part 5 Control Circuit Devices And Switching Elements: Sec 5 Electrical Emergency Stop Devices With Mechanical Latching Function
• Household And Similar Electrical Appliances - Safety: Part 2 - 80 Particular Requirements For Fans (First Revision)
• Wrought Aluminium And Its Alloys ? Chequered/Tread Sheets For General Engineering Purposes ? Specification (First Revision)
• Self-Tapping Screws - Specification (First Revision)
• Plugs And Keys For Resistance Boxes - Specification (First Revision)
• Thermoplastics Hoses (Textile Reinforced) For Compressed Air - Specification (Second Revision)
• Solid Round Glass Fibre Reinforced Polymer (Gfrp) Bars For Concrete Reinforcement - Specification
• Nitrobenzene - Specification (Third Revision)
• Sodium Metabisulphite, Food Grade - Specification (Second Revision)
• Medical Suction Equipment Part 1 Electrically Powered Suction Equipment
• Rubber Conveyor And Elevator Textile Belting Part 2 Heat Resistant Belting
• Textiles - Sand Bags - Specification (First Revision)
• Respiratory Protective Devices Part 3 Fresh Air Hose And Compressed Air Line Breathing Apparatus ( Second Revision )
• Plastic Bottles/Containers For Packaging Of Natural Mineral Water And Packaged Drinking Water - Specification (First Revision)
• Polyethylene Bags For General Purposes - Specification (Third Revision)
• Carbon Disulphide, Technical - Specification (Third Revision)
• Sodium Bichromate Technical Specification
• Toys - Safety of Toys Part 2 Flammability.
• Chromium Trioxide - Specification (Third Revision)
• Methods Of Test For Aggregates For Concrete: Part 1 Particle Size And Shape
• Medical Electrical Equipment Part 2 Particular Requirements For The Safety Section 24 Infusion Pumps And Controllers
• Specification For Rubber Conveyor And Elevator Textile Belting: Part 3 Oil Resistant Belting (Second Revision)
• Protection Of Arms And Hands Part 6 Protective Gloves Against Mechanical Risks
• Safety of Household and Similar Electrical Appliances – Particular Requirements – Commercial Dispensing Appliances and Vending Machines
• Safety of household and similar electrical appliances – particular requirements – appliances for skin or hair care
• Figured, Rolled And Wired Glass - Specification (First Revision)
• BIS Certificate Consultant in jalgaon
• Pyridine - Specification (First Revision) Amendment - 2
• Respiratory Protective Devices Full - Face Masks - Specification (First Revision)
• Medical Textiles - Cotton Bandage Cloth - Specification Third Revision Of Is 863
• Safety of household and similar electrical appliances – particular requirements – domestic electric clothes washing machines
• Cable Trunking and Ducting Systems for Electrical Installations – Cable Trunking and Ducting Systems Intended for Mounting on Walls or Ceiling
• Steel Tubes For Bicycle And Cycle Rickshaws - Specification (Second Revision)
• Injection Moulded/Machined Polyethylene Fittings For Water Supply - Specification ( Second Revision )
• Specification For Modular Lower Limb Orthotic Components: Part 5 Joint Unit, Knee Amendment - 4
• Polyvinyl Chloride (Pvc) Homopolymers - Specification
• Disposable Adult Incontinence Diaper - Specification
• Ac Supplied Electronic Ballasts For Tubular Fluorescent Lamps - Specification: Part 1 General And Safety Requirements
• Monocrotophos, Technical - Specification (Second Revision)
• Specification For Round Open Top Sanitary Cans For Foods And Drinks: Part 1 Tinplate (First Revision)
• Specification For Capacitors Or Electric Fan Motors (First Revision)
• Textiles - Tarpaulins Made From High Density Polyethylene (Hdpe) Woven Fabrics - Specification (Fifth Revision)
• Manually Operated Chaff Cutter - Specification And Test Code(Third Revision)
• Power-Operated Chaff Cutter - Specification And Test Code (First Revision)
• Pesticides - Pendimethalin Ec - Specification
• Steel Wire Ring Net Panels - Definitions And Specifications
• Specification For Horizontally Cast Iron Double Flanged Pipes For Water, Gas And Sewage (First Revision)
• Textiles — 100 Percent Polyester Spun Grey And White Yarns — Specification (Second Revision) Amendment - 3
• Sports Footwear Specification
• Crepe Bandage - Specification ( Second Revision )
• HIPAA Compliance and Audit
• Structured-Wall Plastics Piping Systems For Non-Pressure Drainage And Sewerage - Specification: Part 2 Pipes And Fittings With Non-Smooth External Surface, Type B
• Aluminium Alloy Redraw Rods For Electrical Purposes - Specification
• Battery Operated Motorized Tricycle - Specification (First Revision)
• Benzoic Acid Food Grade - Specification
• Gaskets And Packings Compressed Asbestos Fibre Jointing Specification
• Iso Propyl Alcohol - Specification (Second Revision)
• Autoclaved Reinforced Cellular Concrete Wall Slabs - Specifications (First Revision)
• Carmoisine, Food Grade - Specification (Third Revision)
• Petroleum And Natural Gas Industries Steel Pipe For Pipeline Transportation Systems ( Second Revision )
• Ponceau 4R, Food Grade - Specification (Third Revision)
• Foam Concentrate For Producing Mechanical Foam For Fire Fighting - Specification (Fourth Revision)
• Ready Mixed Paint For Road Marking - Specification (Third Revision)
• Paint, Plastic Emulsion - Specification (Second Revision)
• Spoons - Specification
• Respiratory Protective Devices - Self Contained Closed Circuit Breathing Apparatus Chemical Oxygen (Ko2) Type, Self Generating, Self Rescuers - Specification
• Acetic Anhydride - Specification (Second Revision)
• Portable Liquefied Petroleum Gas Appliances Operating At Vapour Pressure - Specification (First Revision)
• Modular Lower Limb Orthotic Components - Specification Part 4 Joint Unit, Ankle (First Revision)
• Acetic Acid - Specification (Fourth Revision)
• Modular Lower Limb Orthotic Components - Specification Part 3 Stirrup Plates (First Revision)
• Braille Slate - Specification ( First Revision )
• Specification For Jaipur Foot
• Irrigation Equipment - Hydrocyclone Filters - Specification (First Revision)
• Plant Protection And Vector Control Equipment - Fogging Machines - Specification : Part 1 Pulse - Jet - Type Thermal Fogger
• Bitumen Emulsion For Roads (Cationic Type) Amendment - 3
• Zinc Sulphate, Monohydrate, Agricultural Grade - Specification ( First Revision)
• Textiles - Medical/Surgical Gowns And Medical/Surgical Drapes - Specification (First Revision)
• Byproduct Gypsum Agricultural Grade - Specification (First Revision)
• Mineral Mixtures For Supplementing Cattle Feeds - Specification (Fourth Revision)
• Gas Cylinder Valves For Small Refrigerant Cylinders -Specification (First Revision)
• Tapioca Sago (Saboodana) - Specification (Second Revision Of Is 899)
• Blank Granules Specification First Revision
• Textiles - Polyester Textured Yarn - Specification
• Textiles Bedsheets Pillow Cover And Blanket Cover Specification
• Ratchet Lever Hoist — Specification ( First Revision )
• Specification For Zinc Base Alloy Ingots For Die Casting (Second Revision)
• Pretilachlor Emulsifiable Concentrate - Specification
• Textiles - Light Weight Jute Sacking Bags For Packing 50 Kg Mustard Seed, Niger Seed And Ragi - Specification
• Quaternary Ammonium Compound Based Surface Cleaner, Liquid - Specification ( First Revision )
• Biscuits - Specification (Fourth Revision)
• Textiles - Cotton Towelling And Towels - Specification (Second Revison)
• Toys - Safety of Toys Part 7 Requirements and Test Methods for Finger Paints.
• Toys - Safety of Toys Part 4 Swings, Slides and Similar Activity Toys for Indoor and Outdoor Family Domestic Use.
• Aluminium Conductors For Overhead Transmission Purposes Part 6 High Conductivity Aluminium Alloy Stranded Conductors — Specification
• Toys - Safety Requirements for Toys Part 3 Migration of Certain Elements.
• Cast Iron Specials For Mechanical And Push-On Flexible Joints For Pressure Pipes For Water, Gas And Sewage - Specification (Second Revision)
• Liquid Chlorine, Technical - Specification ( Third Revision )
• Polymerized 1,2, Dihydro 2,2,4 - Trimethyl Quinoline (Tmq) - Specification
• Space Systems Simulation Requirements For Control System
• Thiram Water Dispersible Powder For Slurry Seed Treatment - Specification (Second Revision)
• Acetoacetic Methyl Ester - Specification (Third Revision)
• Dimethoate Emulsifiable Concentrate (Ec) - Specification (Third Revision)
• Sheeting, Tickings And Bedsheets - Specifications (Fourth Revision)
• Rim Locks And Latches (Mechanically Operated ) - Specification
• Forged Brass Gate, Globe And Check Valves For Water Works Purposes - Specification
• Precast Concrete Cable Covers - Specification (First Revision)
• Unsintered Polytetrafluoroethylene (Ptfe) Tape For Thread Sealing Applications - Specification
• Needles For Sewing Machines For Industrial Purpose - Specification
• Phenyl Ethyl Alcohol - Specification (First Revision)
• Specification For Malathion Dusting Powders
• Elastic Bandage
• Specification For Ear Protectors
• Carbofuran Granules, Encapsulated - Specification (First Revision)
• Biogas Stove - Specification (Third Revision)
• Phenolic Laminated Sheets - Specification (Second Revision)
• Textiles - Vests, Cotton, Plain (Single Jersey) Knitted - Specification (Fifth Revision)
• Packaged Drinking Water Other Than Packaged Natural Mineral Water Specification Third Revision
• Manually Operated Fertilizer Boradcaster - Specification (First Revision)
• Steel Pipes For Water And Sewage (168.3 To 2540 Mm Outside Diameter) - Specification (Third Revision)
• Steel Frames For Doors - Specification (Third Revision)
• Medical Textile - Permeable Nonwoven Surgical Adhesive Tape - Specification
• Wire Ropes And Strands For General Structural Applications Including Cable Supported Bridges - Specification (Third Revision)
• Medical Textiles Zinc Oxide Elastic Adhesive Bandage Specification Second Revision Of Is 4739
• Medical Textiles - Zinc Oxide Self-Adhesive Plaster - Specification ( Second Revision )
• Sewing Machine Needles For Household Purposes - Specification ( Second Revision )
• Unplasticized Polyvinyl Chloride Pvc-U Threaded Column Pipes For Borewells/Tubewells - Specification
• Diuron, Technical - Specification (First Revision)
• Laboratory Glass Ware - Bottles: Part 1 Screw Neck Bottles (Third Revision)
• Metal Cutting Band Saw Blades: Part 2 Characteristics And Dimensions (Second Revision)
• Chlorinated Polyvinyl Chloride (Cpvc) Resin - Specification
• Arc Welding Equipment: Part 1 Welding Power Source
• 2 - Ethyl Hexan - 1 - Ol - Specification (First Revision)
• Stainless Steel Feeding Bottle For Infants -- Specification
• Specification For Quinizarine, Technical
• Specification For Cold Rolled Brass Sheet, Strip And Foil (Third Revision)
• Shampoo - Specification Fourth Revision
• Refillable Transportable Seamless Aluminium Alloy Gas Cylinders - Specification (First Revision)
• Paraffin Wax — Specification ( Third Revision )
• Mancozeb + Carbendazim, Wettable Powder (Wp) - Specification
• Paving Bitumen - Specification (Fourth Revision) Amendment - 4
• Zinc Ingot - Specification (Fourth Revision)
• Medical Electrical Equipment Part 2- Particular Requirements For Basic Safety And Essential Performance- Sec 49 Multifunction Patient Monitors
• Fuel Oils - Specification (Third Revision)
• Thermal Paper Specification
• Specification For Powrahs (Second Revision)
• Plastics - Mixtures Of Polypropylene (Pp) And Polyethylene (Pe) Recyclate Derived From Pp And Pe Used For Flexible And Rigid Consumer Packaging : Part 1 Designation System And Basis For Specification
• Safety Of Household And Similar Electrical Appliances: Part 2 Particular Requirements: Sec 11 Tumbler Dryers
• Respiratory Protective Devices - Specification : Part 2 Self-Contained Open Circuit Breathing Apparatus (Second Revision)
• Specification For Common Salt And Cattle Licks For Animal Consumption (First Revision)
• Specification For Thermoplastic Hoses (Textile Reinforced) For Water - General Purpose (First Revision)
• Fish Feed - Specification Part 1 Carp Feed
• Battery Hydrometer Portable Syringe Type For Lead-Acid Batteries Specification (First Revision)
• Silica Gel Specification
• High Density Polyethylene Multi Squeezable Tube For Packaging - Specification
• Textiles - Polyester Staples Fibres - Specification (First Revision)
• P-Xylene - Specification (First Revision)
• Medical Electrical Equipment: Part 2 Particular Requirements For The Basic Safety And Essential Performance: Sec 44 X-Ray Equipment For Computed Tomography (First Revision)
• Specification For Flexible Polyurethane Foam For Domestic Mattresses First Revision
• Specification For Steam Sterilizers: Part 2 Horizontal Cylindrical High Speed Steam Sterilizers, Pressure Type (First Revision)
• Specification For Polyethylene Floats (Spherical) For Float Valves (First Revision)
• Polypropylene - Random Copolymer Pipes For Hot And Cold Water Supplies - Specification
• Bamboo Mat Corrugated Sheets - Specification
• Asbestos Cement Building Pipes And Pipe Fittings, Gutters And Gutter Fittings And Roofing Fittings: Part 2 Gutter And Gutter Fittings) (Second Revision)
• Specification For Cane For Visually Handicapped: Part 2 Folding Type
• Foot-Valves, Reflux Valves Or Nonreturn Valves And Bore Valves To Be Used In Suction Lines Of Agricultural Pumping Systems €• Specification ( Second Revision )
• Engine Monoset Pumps For Clear, Cold, Water For Agricultural Purposes - Specification ( First Revision )
• Resilient Seated Cast Iron Air Relief Valves For Water Works Purposes - Specification
• Specification For Controlled Percolating Hose For Fire Fighting (First Revision)
• Suction Apparatus - Specification (Second Revision)
• Specification For Miners Cap - Lamp Batteries (Lead - Acid Type) (First Revision)
• Synthetic Tarpaulins(Heavy Duty Protective Covers) Made From Coated Nylon Or Polyester Fabrics - Specification
• Specification For Lockers, Bedside For Hospital Use
• Mortise Locks And Latches (Mechanically Operated) - Specification (First Revision)
• Respiratory Protective Devices - Filtering Half Masks To Protect Against Particles - Specification (First Revision)
• Methods Of Test For Aggregates For Concrete: Part 3 Specific Gravity, Density, Voids, Absorption And Bulking
• Single-Use Medical Examination Gloves Part 1 Specification For Gloves Made From Rubber Latex Or Rubber Solution Second Revision
• Pulverized Fuel Ash-Cement Bricks- Specification
• Calcium Propionate, Food Grade - Specification (First Revision)
• Non-Electric Cooling Cabinet Made Of Clay
• Specification For High Purity Primary Aluminium Ingots For Remelting For Special Applications
• Ferric Chloride Technical Specification
• Medical Textiles — Nonwoven Fabric For Wipes — Specification
• Vitamin Mineral Premix For Manufacturing Fortified Rice Kernels- Specification
• Caustic Potash - Specification (Second Revision)
• Normal Butyl Alcohol, Technical - Specification (Third Revision)
• Specification For Surface Boxes For Sluice Valves (First Revision)
• Automotive vehicles - Pneumatic tyres for passenger car vehicles– Diagonal and radial ply
• Medical Electrical Equipment Part 2 Particular Requirements For The Basic Safety And Essential Performance Section 21 Infant Radiant Warmer First Revision
• Electrical Moisture Meters - Specification: Part 1 Food Grains Seeds And Flour (First Revision)
• Protection Of Arms And Hands Part 1 Protective Gloves Against Dangerous Chemicals And Micro-Organisms-Terminology And Performance Requirements For Chemical Risks (First Revision)
• Upvc Profiles For Windows And Doors Specification
• Petroleum Naphtha - Specification
• Medical Electrical Equipment: Part 2 Particular Requirements For The Basic Safety And Essential Performance: Sec 37 Ultrasonic Medical Diagnostic And Monitoring Equipment
• Palm Fatty Acids - Specification (First Revision Of Is 12067)
• By-Product Gypsum For Use In Plaster Blocks And Boards - Specification
• Chlorinated Polyvinyl Chloride (Cpcv) Pipe Fittings For Automatic Sprinkler Fire Extinguishing System - Specification
• Specifications For Particular Types Of Winding Wires Part 27 Paper Tape Covered Rectangular Copper Wire ( First Revision )
• Paper Covered Copper Conductors - Specification: Part 1 Round Conductors (First Revision)
• Conductors For Insulated Electric Cables And Flexible Cords - Specification (Second Revision)
• Specification For Vinyl Acetate Monomer
• Corrugated Metal Flexible Safety Gas Hose Assemblies Specification
• Cycles - Safety Requirements For Bicycles For Young Children (First Revision)
• Rubber Flooring Materials For General Purposes - Specification (First Revision)
• Lime-Pozzolana Concrete Blocks For Paving
• Rubber Hoses For Sand And Grit Blasting - Specification (Third Revision)
• Specification For Chemically Resistant Glazed Stoneware Pipes And Fittings (First Revision)
• Linoleum Sheets And Tiles - Specification (Third Revision)
• Rubber Hoses And Hose Assemblies For Liquefied Petroleum Gas (L.p.g) In Motor Vehicles - Specification (First Revision)
• Rubber Hoses And Hose Assemblies For Aircraft Ground Fuelling And Defuelling Specification Fifth Revision Of Is 5797
• Medical Electrical Equipment Part 2 Particular Requirements For The Basic Safety And Essential Performance Section 58 Lens Removal Devices And Vitrectomy Devices For Ophthalmic Surgery
• Linear Low-Density Polyethylene (Lldpe) Films - Specification
• Alloy Steel Forgings For General Industrial Use - Specification (First Revision)
• Specification For Naphthalene (Second Revision)
• Alkyl Benzene Sulphonic Acid (Acid Slurry) - Specification (First Revision)
• Chelated Zinc (Zn - Edta) Agricultural Grade - Specification
• Polyurethane Matt Finish ( Two Pack) - Specification
• Lauric Acid - Specification (First Revision Of Is 10931)
• Specification For Putting Shots Second Revision
• Specification For Throwing Hammers Second Revision
• Rubber Modified Bitumen (Rmb) - Specification
• Polymer Modified Bitumen (Pmb) Specification (First Revision)
• Toilet Cleaner, Liquid - Specification (First Revision)
• Personal Fall Arrest Systems - Specification : Part 9 Descending Devices
• Road Vehicles - Liquefied Petroleum Gas (Lpg) Specific Equipment - Fuel Rail
• Textiles - Flat Woven Webbing Slings Made From Blend Of Polyester Multifilament And High Strength Mixed Polyolefin Tapes - Specification
• Laboratory Glassware - Boiling Flasks: Part 2 Boiling Flasks With Conical Ground Joints (Third Revision)
• Laboratory Glassware - Test Tubes (Third Revision)
• Medical Textiles - Barrier Face Covering - Specification
• Insulating Oil Conditioning Plants - Specification (First Revision)
• Gas Welding Equipment - Pressure Regulators And Pressure Regulators With Flow - Metering Devices For Gas Cylinders Used In Welding, Cutting And Allied Processes Up To 300 Bar (30 Mpa) (Third Revision)
• Textiles - High Density Polyethylene (Hdpe)/Polypropylene (Pp) Leno Woven Sacks For Packaging And Storage Of Fruits And Vegetables - Specification
• Specification For Low And Medium Alloy Steel Covered Electrodes For Manual Metal Arc Welding (Third Revision
• Polyvinyl Chloride (Pvc) And Its Copolymers For Its Safe Use In Contact With Foodstuffs, Pharmaceuticals And Drinking Water - Specification (First Revision)
• In Vitro Diagnostic Test Systems - Requirements For Blood-Glucose Monitoring System For Self-Testing In Managing Diabetes Mellitus (First Revision)
• Specification For Unbonded Rock And Slag Wool For Thermal Insulation (Second Revision)
• Specification For Isopropyl Alcohol For Cosmetic Industry
• Injection Moulded/Machined High Density Polyethylene (Hdpe) Fittings For Potable Water Supplies - - Part 3 : Specific Requirements For 90° Tees
• Specification For Diagnostic Medical X-Ray Equipment: Part 2 Performance Requirements (First Revision)
• Ethylene Vinyl Acetate (Eva) Copolymers For Its Safe Use In Contact With Foodstuffs, Pharmaceuticals And Drinking Water - Specification
• Isopropyl Alcohol, Food Grade - Specification (First Revision)
• Blow Moulded Polyolefin Containers - Specification: Part 3 : Closed Head Containers Over 60 Litres, Up To And Including 250 Litres Capacity (First Revision)
• Low-Voltage Fuses Part 2 Supplementary Requirements For Fuses For Use By Authorized Persons ( Fuses Mainly For Industrial Application ) - Examples Of Standardized Systems Of Fuses A To K
• Carbon Papers - Typewriters - Specification (Second Revision)
• Specification For Power - Operated Pneumatic Sprayer - Cum - Duster : Part 1 Knapsack Type (First Revision)
• Crop Protection Equipment - Foot Sprayer - Specification (Fourth Revision)
• Specification For Emulsifiable Larvicidal Oil, Pyrethrum Based (First Revision)
• Bitumen Emulsion For Roads And Allied Applications (Anionic Type) - Specification (First Revision) Amendment - 1
• Hydraulic Power Sprayers - Specification (First Revision)
• Water Purifiers With Ultra - Violet Disinfection - Specification
• Specification For The National Flag Of India (Cotton Khadi) (Second Revision)
• Multi - Grade Bitumen For Use In Pavement Construction - Specification Amendment - 1
• Aniline, Technical - Specification (Second Revision)
• Precast Concrete Kerbs, Channels, Edging, Quadrants And Other Associated Fittings - Specification ( Second Revision )
• Combination Lock — Specification ( First Revision )
• Sterile Hypodermic Syringes For Single Use (Second Revision)
• Irrigation Equipment - Quick Coupled Polyethylene Pipes And Fittings For Sprinkler Irrigation Systems - Specification
• Safety Of Household And Similar Electrical Appliances: Part 2 Particular Requirements: Sec 76 Electric Fence Energizers
• Brushes For Electrical Machines - Specification
• Specification For Steel Book Cases (First Revision)
• Metal Chairs For Office Purposes Specification Part 1 Non-Revolving And Non-Tilting
• Specification For Electric Bacteriological Incubators (First Revision)
• Instrument Transformers: Part 2 Additional Requirements For Current Transformers
• Textiles Gents Pullover Knitted Specification Second Revision
• Round Strand Galvanized Steel Wire Ropes For Shipping Purposes - Specification (Fourth Revision)
• Specification For Trolley, Hot Food, For Hospital And Industrial Cantee - Ns
• Malt Extract - Specification (Second Revision)
• Rhizobium Inoculants - Specification ( Third Revision )
• Caramel - Specification (Second Revision)
• Protein - Rich Food Supplements For Infants And Pre - School Children - Specification (First Revision)
• Specification For Sterilizers, Bowl And Utensil (Pedal Type)
• Thinner, General Purpose, For Synthetic Paints And Varnishes - Specification
• Ascorbic Acid, Food Grade - Specification (First Revision)
• Requirements For Filtration Equipment: Part 1 Filtration Media - Sand And Gravel
• Sodium Benzoate, Food Grade - Specification (First Revision)
• Epoxy Based Zinc Phosphate Primer (Two Pack) - Specification
• Specification For Electric Serological Water - Baths
• Specification For Steam Sterilizers: Part 3 Pressure Sterilizers, Vertical Cylindrical Type
• Soluble Coffee Powder - Specification (Fourth Revision Of Is 2791)
• Soluble Coffee-Chicory Powder - Specification (Third Revision Of Is 3309)
• Leather Pump Buckets And Seat Valves Made From Vegetable Taned Leather - Specification (Second Revision)
• Non - Percolating Flexible Fire Fighting Delivery Hose - Specification (Fourth Revision)
• Austenitic - Manganese Steel Castings - Specification (First Revision)
• Ready Mixed Paint, Brushing, Bituminous, Black, Acid, Alkali And Heat Resisting - Specification (Fourth Revision)
• Stable Bleaching Powder - Specification: Part 2 Treatment Of Water Intended For Drinking
• Glass Fibre Reinforced Plastic (Grp) Panel Type Door Shutters For Internal Use - Specification
• Safety Matches In Boxes - Specification (Third Revision)
• Specification For Eye - Protectors (First Revision)
• Malted Milk Foods - Specification (Second Revision) Amendment - 1
• Specification For Dichlorvos Emulsifiable Concentrates (First Revision)
• Specification For Insecticidal Space Spray
• Pesticide - Cartap Hydrochloride G - Specification
• Carbon Steel Forgings For General Engineering Purposes - Specification (Third Revision)
• Specification For Hardened And Tempered Washers For High Strength Structural Bolts And Nuts (First Revision)
• Specification For Thin Walled Flexible Quick Coupling Pipes
• Steel Shelving Cabinets ( Adjustable Type ) - Specification ( Third Revision )
• Concrete Admixtures -Specification (First Revision)
• Water Well Screens And Slotted Pipes - Specification (Third Revision)
• Microscopes - Slips And Slidesspecification: Part 1 Microscope Slips: Part 2 Microscope Slides (First Revision)
• Toe Caps For Protection Of Feet - Specification: Part 1 Metallic Toe Caps (Fifth Revision)
• Miners' Cap Lamp Assemblies (Incorporating Lead Acid Type Batteries)
• Conduit Fittings For Electrical Installations - Specification: Part 2 Metal Conduit Fittings
• Specification For Binocular Eyepication For Microscope
• Portable Solid Bio - Mass Cookstove (Chulha) - Specification (First Revision)
• Ammonia Preserved Concentrated Natural Rubber Latex (Second Revision)
• Specification For Pyrethrum Extracts
• Specification For Student - Type Microscope
• Ratchet Pipe Threader For Taper Pipe Threads (R - Series) -- Specification
• Specification For Monocular Dissecting Microscope
• Liquid Nitrogen Vessels Of Capacity Up To 75 Litres — Specification ( Second Revision )
• Pulverized Fuel Ash - Specification: Part 1 For Use As Pozzolana In Cement, Cement Mortar And Concrete (Third Revision)
• Chlorinated Polyvinyl Chloride (Cpvc) Pipes For Automatic Sprinkler Fire Extinguishing System - Specification
• Pumps - Centrifugal Self Priming - Specification (First Revision)
• General Requirements For Light Duty Sewing Machine Heads For Industrial Use
• Irrigation Equipment - Sprinkler Pipes - Specification : Part 1 Polyethylene Pipes (First Revision)
• Vicat Apparatus - Specification (Second Revision)
• Skimmed Milk Powder - Specification: Part 2 Extra Grade (First Revision)
• Specification For Flush Valves And Fittings For Water Closets And Urinals
• Apparatus Used In `Le-Chatelier' Test - Specification (First Revision)
• Specification For Sterilizer, Shallow (Dressing Drum)
• Sterilizer, Instruments, Table Model (Third Revision)
• Steel Tubes For Mechanical And General Engineering Purposes - Specification (Second Revision)
• Fire Extinguisher - 135 Litres Capacity Mechanical Foam Type - Specification
• Unplasticized Polyvinyl Chloride (Upvc) Single Wall Corrugated Pipes For Drainage - Specification (First Revision)
• Processed Cereal Based Complementary Foods ? Specification ( Third Revision )
• Iron Fortified Iodized Salt (Double Fortified Salt) - Food Grade - Specification
• Specification For Sterilizer, Portable, Vertical, Pressure Type
• Specification For Unbacked Flexible Pvc Flooring (Second Revision)
• Glass-Fibre Reinforced Plastics (Grp) Pipes, Joints And Fittings For Use For Potable Water Supply - Specification (First Revision)
• Asbestos Cement Building Types And Pipe Fittings, Gutters And Gutter Fittings And Roofing Fittings - Part 3 : Roofing Fittings
• Cement Concrete Flooring Tiles - Specification (Second Revision)
• Specifications For Particular Types Of Winding Wires: Part 3 Polyester Enamelled Round Copper Wire, Class 155 (First Revision)
• Artificial Limbs - Sach Foot For Lower Extremity Prostheses: Part 1 Design And Dimensions (First Revision)
• Surgical Instruments - Needles, Suture: Part 2 Eyed Needles - Sizes, Shapes And Dimensions
• Skimmed Milk Powder - Specification: Part 1 Standard Grade (Second Revision)
• Steel Tubes For Automotive Purposes - Specification (Third Revision)
• Screwed Closures For Drums — Specification ( Fourth Revision )
• Conduit Systems For Cable Management Part 24 Particular Requirements Conduit Systems Buried Under Ground
• Specification For Cables For Motor Vehicles (Second Revision)
• Braille Shorthand Machine - Specification
• General Requirements Of Packages For Explosives: Part 1 Coommercial High Explosives (First Revision)
• High Pressure Fire Fighting Hose -Specification
• Flexible Pvc Pipes Or Polymer Reinforced Thermoplastic Hoses For Suction And Delivery Lines Of Agricultural Pumps - Specification
• Bulbs (Lamps) For Miners' Cap-Lamps
• Rubberized coir sheets for cushioning – Part 1 Curled
• Ready Mixed Paint, Air Drying, Red Oxide - Zinc Phosphate, Priming - Specification
• Annatto Colour For Food Products - Specification (First Revision)
• Synthetic Food Colour - Preparations And Mixtures - Specification (Second Revision)
• Automotive Vehicles - Electric Horns - Specification Amendment - 4
• Plastic Equilibrium Float Valves For Cold Water Services - Specification (First Revision)
• Specification For Dicofol Emulsifiable Concentrates
• Fire Resisting Record Protection Cabinets - Specification
• Specification For Sphygmomanometer, Aneroid Type (First Revision)
• Irrigation Equipment - Emitting Pipe Systems - Specification (First Revision)
• Artificial Lightweight Aggregate For Concrete - Specification: Part 2 Sintered Fly Ash Coarse Aggregate (First Revision)
• Sodium Alginate,Food Grade Specification (First Revision)
• Plastic Seats And Covers For Water - Closets - Specification: Part 2 Thermoplastic Seats And Covers (Fifth Revision)
• Specification For Concrete Slump Test Apparatus
• Specification For Malathion Emulsifiable Concentrates
• Pesticides - Dimethyl Amine Sl Salts Of 2, 4 - D - Specification (Second Revision)
• Specification For Electronic Weighing Systems: Part 3 Requirements
• Hot Applied Sealing Compounds For Joints In Concrete- Specification (First Revision)
• Specification For Pathological Microscope
• Specification For Trays, Kidney (First Revision)
• Aluminium Conductor For Overhead Transmission Purposes - Specification: Part 5 Aluminium Conductors - Galvanized Steel - Reinforced For Extra High Voltage (400 Kv And Above) (First Revision)
• Specification For Reinforced Concrete Fence Posts (First Revision)
• Electrical Accessories - Circuit - Breakers For Overcurrent Protection For Household And Similar Installations: Part 1 Circuit - Breakers For A.c. Operation (First Revision)
• Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) - Specification
• Countersunk Flat Head Screws (Common head Style) With Type H or Type Z Cross Recess – Product Grade A Part 1 Steel Screws of Property Class 4.8
• Countersunk flat head screws (common head style) with type H or Type Z Cross Recess – Product Grade A part 2 Steel Screws of Property Class 8.8, Stainless Steel Screws and Non – Ferrous Metal Screws
• Ferrules for water services
• Cross Recessed Tapping Screw Part 3 Raised Countersunk Oval Head
• Air Filters for general ventilation – Technical specifications requirements and classification system based upon particulate matter efficiency (ePM)
• Asbestos – Cement Pipes and Fittings for Sewerage and Drainage
• Electrical - Electrical Accessories-Circuit breakers for overcurrent protection for household and similar installations
• Textiles - Pouch for ammunition and grenades made of disruptive pattern nylon-66
• Fibre Reinforced Cement Products – Long Corrugated or Asymmetrical Section Sheets and Fittings for Roofing and Cladding
• Steel and Iron - Chrome molybdenum steel bars and rods for aircraft purposes
• Steel and Iron - Galvanized Structural Steel – Specification
• BIS Certification Process for Foreign Manufacturers
• How to get BIS certification in India
• BIS Certificate Consultant in Pune
• BIS Registration consultant
• BIS Certificate Consultant in Ahmednagar
• BRCGS Certificate
• GreenPro Certificate
• NSIC (SPRS) Registration in India
• BIS Certificate Consultant in Kolhapur
• Why you need a BIS certificate consultant
• BIS Certificate Consultant in Sangli
• BIS Certificate consultant in India
• SOC 2 Compliance and Audit
• BIS Certification in India
• BIS Certificate Consultant Near Me
• How Does BIS Certification Benefit Businesses
• How Does BIS Ensure Steel Quality & Safety
• FCC Certificate
• UL Certification
• How Foreign Manufacturers Get BIS Certification
• Why You Need a BIS Certificate Consultant in India for Approval
• What Is BIS IS 210 and Why Is It Important for Iron Castings
• BIS Certification Cost Breakdown: What You'll Actually Pay
• How to Get BIS Certificate in India: Step-by-Step Guide
• How Can Manufacturers & Importers Get BIS Certification Easily
• Common BIS Certification Mistakes to Avoid for Faster Approval
• Does BIS Certification Help My Business Grow
• Top Reasons to Hire a BIS Certificate Consultant in 2026
• What Happens If You Import Products Without BIS Certification?
• Why Businesses in Maharashtra Need a BIS Certificate Consultant
• How to Apply for BIS Certificate Registration Online in India
• BIS Product Certification vs BIS CRS: A Quick Guide
• Why Should Importers Hire a BIS Consultant
• BIS Certificate Registration: Eligibility, Documents & Process
• BIS Certificate Renewal: Documents & Important Requirements
• BIS Registration for Manufacturers: Requirements & Benefits
• ISO 22000:2018 Food safety management system
• ISO 50001 : 2018 Energy Management system
• ISO 22301:2019 Business Continuity Management Systems
• ISO 9001:2015 Quality management system
• ISO 14001 : 2015 Environmental Management system
• CE Certificate
• ISO 45001 : 2018 Occupational Health & Safety Management System
• ISO 27001 : 2022 Information Security Management System
• ISO 20000-1 : 2018 Information technology safety management system
• ISO 13485 : 2016 Medical Devices Quality Management System
• ISO 21001:2025 Management systems for educational organizations
• ZED Certification (Zero Defect Zero Effect)
• BIS Compulsory Registration - CRS (Scheme II)
• BIS Scheme X Certification
• BIS Hallmark
• CDSCO License and Registration in India
• How BIS Certification Builds Consumer Trust & Product Credibility
• CISA (Certified Information Systems Auditor) Certification
• CMMI Appraisal and Maturity Levels
• BIS (ISI MARK) for domestic manufacturer
• BIS (ISI MARK) for foregien manufacturer